Page 1 5.0 Manual (Beta3) Table of Contents 1. Special Features 2. Installation / Removal 2-1 Installation 2-2 Removal 3. Parts and Functions 3-1 Repeat 3-2 Play back 3-3 Timer Indicator 3-4 Instant Slide Bar 3-5 Album Management 3-6 Selection of Play list...
Page 2 7. Album Management 7-1 Addition of file(s) to an album 7-2 Addition of URL 7-3 Making New Album (Folder Selection) 7-4 Upgraded File Management 7-5 Play File in an Album 7-6 Read/Send Data in an Album 7-7 Move file to other Album 7-8 Upgraded features in making new Album 7-9 Search/Mix/File Inspection 8.
Page 3 Playback features for various Multimedia files jetAudio 5.0 not only supports the popular audio files such as MP3, OGG and WMA but also visual files such as AVI, MOV, MPEG, Real Media, DVD VIDEO, etc..
Page 4 Then you will see the Figure 2.7. window and then the program will be removed successfully. The folder, in which jetAudio has been installed, and the folders such as jetCDP.sdb, jetWave, JADPlugins.cache file, won’t be removed unless you remove the each folder respectively.
Page 5 3. Parts and Features (Note) This explanation is based on the jetAudio’s features on its basic skin (Figure3.1) ; only the graphic design of jetAudio’s skin can be changed according to your preference; the features on the skin stays the same.
Page 6 3-3 Time When you click Timer button you will see two choices of mode. Elapsed Time indicates the elapsed time since the beginning of the playback Remaining Time indicates the remaining time for the current playback 3-4 Instant Slide Bar By clicking and dragging the Slide Bar, you can move to any location in the track which is currently playing 3-5 Album Management...
Page 7 You can select Play mode. (Disk or File) 3-15 Sound Effect features jetAudio 5.0 has various sound effect features. Please refer to Sound Effect Section.. 3-16 Graphic Equalizer/Spectrum Spectrum will be displayed when music CD, Mp3, or MIDI is on. User Mode is available for you to select the sound effects such as rock, pop, Jazz, classic, vocal and flat.
Page 8 Tray Bar. Refer to Chapter. 4-2. 3-24 Lyric Viewer Can adjust Lyric Viewer. (Note) Lyric Viewer will only be activated when there configuration is setting 3-25 jetAudio Information Window Displays jetAudio’s Information Window. This window also has browser feature.
Page 9 Going forward :If there is a next page, goes forward to that page. Refresh : Re-view the current page Information : Can take a look at the information provided by jetAudio. Go to jetCast Home Page : Move to jetCast Home page.
Page 10 If you click right mouse button on the media file, Figure 4-1will be displayed. Click the appropriate menu to play jetAudio. 1. jetAudio icon on the Tray Bar : The below shows the jetAudio on the Tray Bar. Click in jetAudio Icon on the Tray Bar using right mouse button, then the menu will be displayed.
Page 11 [Figure4.3 Tray Icon Menu for jetAudio] 1. File/Disk Mode: Convert file or disk mode. 2. Driver: If there are multiple CD related drivers, you can select a driver for playback. 3. Open: Displays the preference window to select a file to be played.
Page 12 15. Minimie/Restore: Can adjust jetAudio: minimize or return to original state 16. Exit: Exit from jetAudio.
Page 13 5. Various Sound Effects You can enjoy various sound effects played from jetAudio 5.0. [Figure5.2 Sound Effect Setting Window] Setting Equalizer: Can be set in six different user modes such as rock, pop, jazz, classic, vocal, flat. Wide Effect: Can improve space perception of sound.
Page 14 Select User Mode then you will see a window like Flat Mode. Adjust the wave level by mouse. Once you are done with setting, the adjusted level will be memorized there on; whenever you select User, the adjusted level will be activated. 5-2 Adjusting Sound Effect In the Figure 5.2, select a check box to activate a specific sound effect and move the slide bar to adjust the level.
Page 15 6. Timer/Alarm By reserving time on Timer or Alarm, you can activate jetAudio at any time. Select Timer or Alarm and click Action button then you will see Figure 6.2. [Figure 6.2 Timer / Alarm Action Window ] The action window for Timer and Alarm is identical.
Page 16 therefore, you need to check this before you activate these modes. Please be aware that Timer is not as accurate as clock.
Page 17 Shift or Ctrl key. By clicking Add to List button, all the files in the selected folder can be added. If you select any file from Windows Explorer and move it to jetAudio’s main window or Album Management Widow, the file will be automatically registered (drag and...
Page 18 You can extract Play list file (*M3U, PLS) from most MP3 player by Read / Send and make it into a jetAudio album. The reverse mode is also possible; change jetAudio album file to Play list file and store it. These two features can be activated by clicking the following buttons: Album, Read or Album, Send.
Page 19 By clicking Search, you can find a specific word or sentence in the album, and by clicking Mix, you can change the order of registered files. File Inspection allows you to inspect the current files and update the data in the file. 7-10 Playlist Window This window displays a list of songs currently playing.
Page 20 8. Configuration / Skin This is a general Preference window of jetAudio. As you can see in Figure 8.1, the window can be divided mainly into two; one is file and CD related and the other is disc related such as DVD. In Disc preference, you can select Audio CD or DVD and in File preference, you can select file connecting modes.
Page 21 Information Window. Display : If you click in Tray icon with right mouse button, the information on track or album will be displayed.. [Figure 8.1.1 Display Setting for jetAudio] Track Indication Mode: you can select an indication mode...
Page 22: Auto Update
Lyric Viewer [Figure 8.1.2 Lyric Viewer Configuration] If the lyric for a song is available, jetAudio will search for the lyric in a selected folder and will display it. Auto Update : [Figure 8.1.3 Auto Update Configuration for jetAudio]...
Page 23 2. Reserve Regular Inspection Period: By reserving the regular inspection period beforehand, you can inspect the updated information of jetAudio from its web- site on a regular basis. 8-2 Audio CD Figure 8.2 shows the options for automatic activation when a disk (CD Rom or DVD Rom) is inserted.
Page 24 10 seconds between tracks. Information: Can select Automatic connection mode to CDDB and ripping mode for CD text. When loading starts jetAudio will be automatically connected to CDDB and will start to extract data from CD.
Page 25 [ Figure 8.2.2 Advanced CD Configuration window ] 8-3 DVD Setting Register: When you click Register button jetAudio will be automatically activated as DVD Title is loading. Restore: When you click Restore button default DVD player setting will be restored.
Page 26 (Note) If a DVD with a parental classification mode is inserted in the drive, you will see a window in which you need to input a password. You need to input a correct password to play DVD. [Figure 8.3.1 DVD Parental Mode Configuration] Video Options: Usually DVD screen size is 16:9 but other options for size are [Figure 8.3.2 DVD Video Configuration Window]...
Page 27 Pan-Scan: One or both sides of the screen will be blank. Letter-Box: Wide spread-out screen, blank spaces appear on top and bottom of the screen. Language Options: Can select any language from DVD menu. If DVD menu doesn’t accommodate your choice of language, default language may be played.
Page 28 2. File Type Association: Shows choice of file modes which are to be Once the file mode selection has been made, you just need to open file or by double clicking, you can start jetAudio. Next step is to connect the extension files of your choice to jetAudio in Preference Figure 8.9.
Page 29 [Figure 8.4.2 File Association for JetAudio] [Figure 8.4.3 Advanced Configuration Window]...
Page 30 [Figure 8.4.4 Advanced Configuration for Output] 8-5 Advanced Preference : You can configuration for playing thread priority. In general, you don’t need to have this preference if you don’t have any problem in playing file or CD. If there are sound breaks while playing file or CD, you could prevent them by making some selection in this preference window.
Page 31 Output : Selection of filter which is responsible for output [Figure 8.4.4.1 Configuration window for JwavOut.dll] For example, in case of JwavOut.dll, a resolution filter, you can make your selection on Figure 8.4.4.1. Input: Selection of filter which is responsible for input [Figure 8.4.5 Configuration for Input Plug-ins]...
Page 32 You can select the default skin, which is already registered, like Figure 8.6. You can locate Skin file under Skin folder in *.jsk mode. Downloading from web: Go to jetAudio Skin page and download any skin of your choice.. selected [Figure 8.6 Skin Selection window]...
Page 33 9. CD Ripping The data in audio CD will be ripped and converted to your choice of file mode and stored. The major file modes are MP3, OGG, Real Media, WAV, WMA. By clicking Rip CD button, you can make necessary input in the Figure 9.1. 1.
Page 34 8. Output file format: Audio CD data can be stored as MP3, OGG,WMA, or Real Media file mode in jetAudio 5.0. Each file mode has additional sub- features which can be selected also. For example, if you select MP3 file mode you will see Figure 9.3, which shows the file’s additional sub- features.
Page 35 [Figure 9.3 Encoding Configuration for MP3] 11. More than one track can be stored in a single file; this function is very useful when you want to rip a classic music which is divided into several tracks. For example, if track 1 and track 2 are a single music then you could select both to store them in a file.
Page 36 As stipulated previously in Basic Feature Chapter, jetAudio can read and play various files. Therefore, any kind of file, which is compatible with jetAudio 5.0, can be converted to MP3, OGG, Real Media, and WAV file mode. MP3: File capacity is one tenth of WAVE file and sound quality equals that of music CD.
Page 37 [Figure 10.1 File Conversion window] 1. Add file: Can add a file for conversion by selecting a file which needed to be converted. 2. Remove file: Remove a selected file from conversion list. 3. Clear: Remove everything on the file list. 4.
Page 38 [Figure 10.2 Configuration window for OGG file Format]...
Page 39 3. File Name Mode: Decides the name for the file that you want to record. 4. Store/Configuration Mode: Decides the Store mode regardless of source. jetAudio supports MP3, OGG, Media, WAV, and AMA mode. For example, Figure 11.2 shows WMA Configuration.
Page 40 (Note) The source on Figure 11.1 may vary depending on the sound card you are using. The sound quality may also vary depending on the sound card and systems. (Note) Due to a low OGG encoding speed of jetAudio 5.0, the recording may not be smooth in some computers.
Page 41 12.CD Burning You can burn any music CD from any music files. 1. Add File: Selects a file which is to be made into a music CD. 2. Remove: Removes the selected list from the entire list. 3. Remove All: Removes the entire list. 4.
Page 42 [Figure 12.2 Configuration for Drive window] 6. Remove: This button is for removing everything on CD-CW. When you click the button you will see Figure 12.3. Then you can select Quick Erase or Full Erase. [Figure 12.3 CD-RW Erase window]...
Page 43 [Figure 12.4 Erasing] 7. Start: When erasing of CD is completed then burning will start.
Page 44 13. Broadcasting By using jetCast, which is provided along with jetAudio, you can star t your own broadcasting station. By clicking Broadcasting button you can ta ke a look at the broadcasting channels in jetCast home page.. For a detailed information regarding the features please refer to jetCast Manual.
Page 45 14. Digital Video Playback You can play various audiovisual files with jetAudio 5.0. If an audiovisual file has subtitles, the subtitle can be displayed also. There are two types of Playback Windows as 14.1 and 14.2. [Figure 14.1 General multimedia playback window]...
Page 46 II. Vertical Screen Flip: Flips the screen vertically. III. Subtitle Screen Flip: Flips the subtitle vertically. IV. Selection of Subtitle File/Language: Regardless of extension, if the name of the file and the default value are the same, jetAudio will recognize the file and play it.
Page 47 [Figure 14.3 Subtitle Configuration window] Font Window Advanced Renderer: Can improve the quality of screen. This may cause irregularities on the screen since this feature increases CPU. If this happens, you can cancel this feature to resume its original state.. II.
Page 48 Figure 14.4 Font Configuration window] Location of Subtitle Location: The location of subtitle can be adjusted based on vertical and horizontal ratio. II. Size: The thickness of subtitle can be adjusted. Figure 14.5 Subtitle position configuration window]...
Page 49 Timing Control [Figure 14.6 Subtitle time delay configuration window] By forwarding (+) and rewinding(-) timing , you can adjust the screen and subtitle to match properly. II. DVD Playback...
Page 50 Appendix CDDB: There is ID number for every music CD. By using this ID you can searc h internet music database. If the database has the data for the music CD, jetA udio will automatically download this data. This database for music CD is called CDDB.

This manual is also suitable for:

Jetaudio 5.0

Cowon jetAudio User Manual

3-3 Timer Indicator

Album Management

3-15 Sound Effect Components

3-13 Speedy Selection of Album

7-7 Move File to Other Album

7-6 Read/Send Data in an Album

CD Ripping

Conversion

Recording

CD Burning

Broadcasting

Digital Video Playback

Appendix

Quick Links

Table of Contents

Related Manuals for Cowon jetAudio

Summary of Contents for Cowon jetAudio

Page 22: Auto Update

This manual is also suitable for:

Table of Contents