Related Manuals for Sencor STM 7900
Summary of Contents for Sencor STM 7900
- Page 1 STM 7900 EN Multifunctional stand mixer Translation of the original manual Copyright © 2021, Fast ČR, a.s. - 1 - 04/2021...
- Page 2 Multifunctional stand mixer Important safety instructions READ CAREFULLY AND STORE FOR FUTURE USE. General warnings This appliance may not be used by children. Keep the appliance ■ and its power cord away from children. The appliance may be used by persons with reduced physical, ■...
- Page 3 Electrical safety ■ Before connecting this appliance to a power socket, make sure that the voltage stated on its rating label corresponds to the voltage in your power socket. ■ Connect the appliance only to a properly grounded socket. Do not use an extension cord. ■...
- Page 4 STM 7900 Copyright © 2021, Fast ČR, a.s. - 4 - 04/2021...
- Page 5 Copyright © 2021, Fast ČR, a.s. - 5 - 04/2021...
- Page 6 Copyright © 2021, Fast ČR, a.s. - 6 - 04/2021...
- Page 7 Copyright © 2021, Fast ČR, a.s. - 7 - 04/2021...
-
Page 8: Operation
Attention: Multifunctional Accessories B1 to B5, the metal parts of the meat grinder D1 and the grater E2 are not intended for washing in a dishwasher. Other stand mixer removable parts may be washed in a dishwasher. When washing the blade assembly A21, take special care to avoid injury on the sharp cutting edges. - Page 9 Attention: ■ Place the grinding blade D3 on to the shaft (with the cutting edge facing outwards Items such as spoons, kitchen knives, forks, etc. must not be from the chamber) and on to it attach a grinding plate D4 or D6 or D8 (depending placed into the appliance during operation as this could result in on the preferred the grind texture).
- Page 10 ■ The ground meat will fall into the prepared bowl. The meat that remains in the ■ Place the outer lid C2 on to the blending jar so that its edges copy the neck of the grinding chamber D10 can be removed by grinding a slice of bread or a bread roll. jar, and push it down thoroughly along its entire perimeter.
- Page 11 Mounting the grater on to the stand mixer ■ Clean the blending jar C3 by filling it with 0.5 litre of clean water and a few drops of ■ Make sure that the stand mixer is disconnected from the power socket. The multi- kitchen detergent and then assemble the blender and run it for 10 to 15 seconds.