Techly I-ALARM-KPAD Manual

Wireless keypad
Table of Contents

Advertisement

Available languages

Available languages

Quick Links

Wireless
Keypad
www.techly.com
EN

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the I-ALARM-KPAD and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Techly I-ALARM-KPAD

  • Page 1 Wireless Keypad www.techly.com...
  • Page 2: Box Content

    This keypad enables you to arm and disarm your alarm system, or arm it in Home Mode. Before entering your home, all you need to do is type your passcode and press the Disarm button [ ], or swipe the RFID tag (sold separately) in front of RFID reader to disarm the system.
  • Page 3 Appearance LED Indicator RFID reader* Arm/Unlock Disarm Home Mode / Unlock SOS key *RFID tag (125 KHZ) sold separately. The keypad supports up to 50 RFID tags. Refer the instructions on page 9 of this manual to learn how to register and RFID tag in the keypad.
  • Page 4 Rear cover Battery compartment Tamper switch...
  • Page 5: Preparation Before Use

    Preparation Before Use How to turn the keypad on The keypad is powered by 3 AAA batteries. Before using for the first time, remove the battery strip. 1. Unscrew and open the case. 2. Insert the batteries according to the positive and negative signs.
  • Page 6: Installation

    Installation 1. Unscrew the case and open it. 2. Screw the rear cover to a door frame or to a wall. 3. Fasten the front cover of the keypad to the real cover and screw them together. Remark Because of the tamper switch, opening the rear cover of the keypad when the latter is on triggers the alarm.
  • Page 7 Setup The keypad operates under 4 modes. Normal mode The LED indicator blinks once every 5 seconds. Sleep mode Under Normal mode, the keypad switches to sleep mode if no operation is made for 35 seconds. Press the Arm [ ] or Home Mode [ ] keys to exit Sleep mode.
  • Page 8 Register the keypad in the control panel Make sure the control panel is in Connection mode (re- fer to the user’s manual of your alarm system) Press Arm [ ] or Home Mode [ ] on the keypad to unlock it. Type your usercode or admin code on the keypad, and then press any of the Arm [ ], Dis-...
  • Page 9 Register an RFID tag in the keypad 1. Press Arm [ ] or Home Mode [ ] on the keypad to unlock it. Then type [admin code + #] to enter Setup Mode. Default admin code: 123456 If you hear 2 beeps, the code you have typed is wrong. 2.
  • Page 10 Usage The keypad can be used as a remote control. Your user code or your admin code will be required before arming or disarming the system, or switching to Home Mode or Mute Mode. Arm the system 1. Press Arm [ ] or Home Mode [ ] on the keypad to unlock it.
  • Page 11: Home Mode

    Disarming by RFID tag 1. Press Arm [ ] or Home Mode [ ] on the keypad to unlock it. 2. Press [*] to activate the RFID reader for 10 seconds. 3. Within the next 10 seconds, swipe the RFID tag in front of the reader to disarm the system.
  • Page 12: Emergency Call

    Emergency call Refer to the instructions page 14 of this manual for more information on how to lock/unlock the SOS button. With SOS button unlocked 1. Press Arm [ ] or Home Mode [ ] on the keypad to unlock it. 2.
  • Page 13: Exit Delay

    Setting Enter Setup mode Press Arm [ ] or Home Mode [ ] on the keypad to unlock it. Type [admin code+#] to enter Setup mode. Default admin code: 123456 Under setup mode, if no operation is made for 30 seconds the keypad will exit the setup mode automatically.
  • Page 14 If the exit delay has been set, the control panel will beep once every second after having pressed the Arm [ ] key. The rhythm of the beeps will speed up during the last 15 seconds. After the exit delay time has elapsed, the con- trol panel is armed.
  • Page 15 Keyboard clicks Keyboard clicks can be turned on or off. If keyboard clicks are off, the successful setup notification sound will be off too. Turn keyboard clicks on 1. Enter Setup mode. 2. Type [3510#]. 3. You hear one beep: the setup is successful.
  • Page 16 Enable / Disable deactivation by RFID tag Enable deactivation of the system by RFID tag 1. Enter Setup mode. 2. Type [3610#]. 3. You head one beep: the setup is successful. Disable deactivation of the system by RFID tag 1. Enter setup mode. 2.
  • Page 17 Change user code The user code may be required to interact with the con- trol panel (arm or disarm the system, or switch to Home Mode). We recommend you to change the user code be- fore using the keypad for the first time. 1.
  • Page 18 Reset After having reset the keypad, the user code, the admin code, and other settings will be restored to default set- tings.The RFID tags that have been registered will not be deleted from the keypad. 1. Enter Setup mode. 2. Type [987654321#]. 3.
  • Page 19 Register the keypad No response from the The keypad is not in the control panel control panel when registered in the by following the operating on the instructions in this control panel. keypad manual. The keypad is Install the keypad installed too far from and the control panel the control panel.
  • Page 20: Care And Maintenance

    Care and Maintenance For a safer use and a longer lifetime of the keypad, we recommend you to follow the instruction listed below. Usage notices • This keypad must be registered in the control panel of your alarm system before being used for the first time.
  • Page 21: Maintenance

    There is a separate collections system for there products in com- pliance with WEEE directive, otherwise contaminative and hazardous substances can pollute the enviroment. With CE sign, Techly® ensures that the product is conformed to the basic European standards and directives.
  • Page 22 www.techly.com...
  • Page 23 Tastierino Wireless www.techly.com...
  • Page 24: Contenuto Della Confezione

    Questa tastiera vi permette di inserire o disinserire il vo- stro sistema di allarme o di attivarlo in modalità Home. Prima di entrare in casa, tutto quello che dovete fare è digitare il vostro codice di ingresso e premere il tasto Di- sattiva ( ), o agitare l’RFID tag (venduto separatamente) davanti al lettore RFID per disattivare il sistema.
  • Page 25 Struttura Indicatore LED lettore RFID * Inserimento/ Sblocca Disinserimento Modalità Home/Blocca Tasto SOS *RFID tag (125KHz) venduto separata- mente. Il tastierino supporta fino a 50 RFID tag. Fare riferimento alle istruzioni a pag. 32 di questo manuale per apprendere come registrare un RFID tag sul tastie- rino.
  • Page 26 Pannello posteriore Compartimento batteria Dispositivo antimanomissione...
  • Page 27: Preparazione Prima Dell'uso

    Preparazione prima dell’uso Come accendere il tastierino Il tastierino è alimentato tramite 3 batterie AAA. Prima di utilizzarlo per la prima volta, rimuovere la striscia pro- tettiva della batteria. 1. Svitare la vite e aprire il coperchio. 2. Inserire le batterie rispettando la polarità indicata. 3.
  • Page 28: Installazione

    Installazione 1. Svitare l’alloggiamento e aprirlo. 2. Avvitare il coperchio posteriore sul profilo della porta o sul muro. 3. Fissare la copertura frontale del tastierino al coper- chio posteriore e avvitarli insieme. Nota A causa del dispositivo antimanomissione, aprendo il coperchio posteriore del tastierino quando quest’ultimo è...
  • Page 29 Configurazione Il tastierino opera in quattro modalità diverse: Modalità normale L’indicatore LED lampaggia una volta ogni 5 secondi. Modalità sleep Nella modalità normale, il tastierino passa alla modali- tà sleep se non viene effettuata alcuna operazione per 35 secondi. Premere il tasto Inserimento ( ) o modalità home ( ) per uscire dalla modalità...
  • Page 30 Registrazione nel pannello di controllo Assicurarsi che il pannello di controllo sia in modalità connessione (fare riferimento al manuale d’istruzione del vostro sistema di allarme). Premere il tasto inserimento ( ) o modalità Home ( ) sul tastierino per sbloccarlo. Di- gitare il vostro codice utente o il codice amministratore sul tastierino, quindi premere uno...
  • Page 31 Connessione ad una sirena Può essere collegato ad una sirena interna o esterna, che vi permette di innescare l’allarme sonoro premen- do il tasto [SOS] sul vostro tastierino. Per connettere il tastierino alla sirena, impostare la sirena wireless nella modalità connessione (far riferimento al manuale della sirena se necessario).
  • Page 32 Registrazione di un RFID tag 1. Premere il tasto inserimen- to ( ) o modalità home ( ) sul tastierino per sbloccarlo. Digi- [codice amminis- tare quindi tratore+#] per accedere alla modalità di configurazione. Codice amministratore prede- finito: 123456 Se udirete 2 beep il codice amministratore che avete di- gitato è...
  • Page 33 Utilizzo Il tastierino può essere utilizzato come un telecomando per il controllo remoto. Il vostro codice utente o il codice amministratore verranno richiesti prima di attivare o di- sattivare il sistema, o per passare dalla modalità Home alla modalità Mute. Attivazione del sistema 1.
  • Page 34 Disattivazione del sistema tramite tastierino 1. Premere il tasto Inserimento ( ) o modalità home ( ) sul tastierino per sbloccarlo. 2. Digitare il vostro codice utente o il codice amministratore. 3. Premere il tasto Disinserimento ( ). L’indicatore LED lam- peggia una volta, il tastierino emette un segnale acustico e in- via al pannello di controllo il segnale di disattivare il sistema.
  • Page 35 Disattivazione tramite RFID tag 1. Premere il tasto Inserimento ( ) o modalità home ( ) sul tastierino per sbloccarlo. 2. Premere [*] per attivare il lettore RFID per 10 secondi. 3. Entro i prossimi 10 secondi, fate passare l’RFID tag di fronte al letto- re per disattivare il sistema.
  • Page 36 Modalità Home 1. Premere il tasto Inserimento ( ) o modalità home ( ) sul tastierino per sbloccarlo. 2. Digitare il vostro codice utente o il codice amministratore. 3. Premere il tasto ( ): l’indicatore LED lampeggia una volta, il tastierino emet- te un suono e invia il segnale al pannel- lo di controllo per passare alla modalità...
  • Page 37 Telefonata di emergenza Fare riferimento alla pagina 41 di questo manuale per ulteriori informazioni su come bloccare/sbloccare il ta- sto SOS. Con il tasto SOS sbloccato 1. Premere il tasto Inserimento ( ) o modalità home ( ) sul tastierino per sbloccarlo.
  • Page 38 Configurazione Accedere alla modalità di configurazione Premere il tasto Inserimento ( ) o modalità home ( ) sul tastierino per sbloccarlo. Digitare [codice ammini- stratore+#] per accedere alla moda- lità configurazione. Codice amministratore predefinito: 123456 Nella modalità configurazione, se nessuna operazione viene effettuata per 30 secondi sul tastierino automati- camente si uscirà...
  • Page 39 Uscita differita I rilevatori sono in grado di rilevare potenziali intrusi immediatamente dopo che il sistema è stato attivato. Per prevenire l’innescarsi dell’allarme quando si sta uscendo dall’abitazione, è possibile impostare un’usci- ta ritardata. Se è stata impostata un’uscita differita, il pannello di controllo riceverà...
  • Page 40 Se il tempo di uscita differito è stato impostato, il pan- nello di controllo emetterà un beep ogni secondo dopo che è stato premuto il tasto Inserimento ( ). Il ritmo del segnale acustico aumenterà durante gli ultimi 15 secon- di.
  • Page 41 Blocco/Sblocco del tasto SOS Bloccare il tasto SOS 1. Accedere alla modalità configu- razione. 2. Digitare [3410#]. 3. Udirete un beep: la configurazio- ne è avvenuta con successo. Se il tasto SOS è bloccato, dovete premere il tasto Inserimento ( ) o il tasto modalità Home ( ) per sbloccare il tastierino, digitare il vostro codice amministratore o utente, quindi pre- mere [SOS] per innescare l’allarme.
  • Page 42 Tastierino in modalità silenziosa È possibile passare alla modalità silenziosa per i tasti del tastierino. Attivazione del clic dei tasti 1. Accedere alla modalità configu- razione. 2. Digitare [3510#]. 3. Udirete un unico beep: la confi- gurazione è avvenuta con successo. Disattivazione del clic dei tasti 1.
  • Page 43 Abilita / Disabilita disattivazione tramite RFID tag Abilita disattivazione del sistema tramite RFID tag 1. Accedere alla modalità configu- razione. 2. Digitare [3610#]. 3. Udirete un beep: la configurazio- ne è avvenuta con successo. Disabilita disattivazione del sistema tramite RFID tag 1.
  • Page 44 Cambiare codice utente Il codice utente viene richiesto per interagire con il pannello di controllo (inserire o disinserire il sistema di allarme o pas- sare alla modalità Home). Si raccomanda di cambiare il codi- ce utente prima di utilizzare il tastierino per la prima volta. 1.
  • Page 45 Reset Il reset del tastierino comporta l’eliminazione del codice utente, del codice amministratore e delle altre configu- razioni personalizzate che verranno riportate alle impo- stazioni di fabbrica originali. Gli RFID tag che erano stati registrati non verranno cancellati del tastierino. 1.
  • Page 46 Registrare il tastierino Nessuna risposta dal Il tastierino non nel pannello di pannello di controllo è registrato nel controllo seguendo le quando si lavora sul pannello di controllo istruzioni contenute in tastierino questo manuale Il tastierino è instal- Installare il tastierino lato troppo distante e il pannello di dal pannello di...
  • Page 47: Cura E Manutenzione

    Cura e manutenzione Per un uso più sicuro e una maggiore durata della ta- stiera, si consiglia di seguire le indicazioni di seguito elencate. Avvertenze d’uso • Questo tastiera deve essere registrata nel pannello di controllo del sistema di allarme, prima di essere uti- lizzata per la prima volta.
  • Page 48: Manutenzione

    Contattate le autorità locali competenti per ottenere informazioni in merito allo smaltimento corretto della presente apparecchiatura. Con il marchio CE, Techly® garantisce che il prodot- to è conforme alle norme e direttive europee ri- chieste. www.techly.com...

This manual is also suitable for:

8054529027460

Table of Contents