Table of Contents
Related Manuals for Kettler Kalos Ibiza
Summary of Contents for Kettler Kalos Ibiza
- Page 1 Assembly Instructions Ibiza Free Standing Heater KLEH162-0600 IMPORTANT PLEASE KEEP THIS BOOKLET FOR FUTURE REFERENCE. THIS IS IMPORTANT INFORMATION REGARDING THE USE AND CARE OF YOUR HALOGEN HEATER. ASSEMBLY PERSONS TIME REQUIRED Nov 2020...
- Page 2 Do not use any other tools other than those recommended to build this product. Please do not use substitute parts. Use only additional or replacement parts supplied by Kettler. In the unlikely event that this product has missing or damaged parts, please visit our...
-
Page 3: For Your Safety
For Your Safety Warning • This heater is not equipped with a device • Children of less than 3 years to control the room temperature. should be kept away unless continuously use this heater in small rooms when supervised. they are occupied by persons not capable •... - Page 4 For Your Safety Site the heater outside or in a large flammable dust. open area and well away from any 14. The head of the unit is at high obstructions such as branches or where temperature during operation. Unplug the heater is near any objects that can the unit and wait untill it cools before be effected by heat, such as furniture, cleaning.
- Page 5 For Your Safety 23. Children should be supervised to ensure order to avoid a hazard. that they do not play with the appliance. 24. If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons in Warning •...
- Page 6 Assembly . Fix the bottom tube onto the base by screwing. . Connect the middle tube with bottom tube by screwing them together.
- Page 7 Assembly . Connect the top tube with middle tube by screwing them together (as same as Step2). . Place the power cord plug through the base , bottom tube, middle tube and top tube. Connect the power cord plug to the socket in the heater head.
- Page 8 Assembly Insert the Heater Head onto the top tube and fix in position using the 4*8mm screws. Fix the Power Cord on the Base by using the 4*M4 screws.
- Page 9 Assembly Fix the heater to the ground by screwing via the fixing plates. Loosen the two M6*10 screws by the L hexagonal wrench to change the best angle of the heating head, then retighten them.
-
Page 10: Remote Control Operation
Operation Connect the power cable to a 220-240V 13amp supply that is located in a safe, dry area. • Press “ ” to turn the heater on • Press on the panel for low setting (800W) • Press on the panel for the medium setting (1600W) •... -
Page 11: Care And Maintenance
Operation Care and Maintenance • When disconnected from the electrical supply, clean the outside of the patio heater with a damp cloth. Never use corrosive or solvent cleaners or immerse in water. • Any maintenance or repairs including replacing the halogen tube should only be carried out by a qualified electrician or by a recommended service center. - Page 12 Notes...
- Page 13 Notes...
-
Page 14: Maintenance And Care Instructions
• Damaged components may endanger your safety or shorten the life of the product. Replace all damaged parts immediately. Use only spare parts manufactured by Kettler. Should you wish to purchase spare parts, they can be ordered directly from: www.kettler.co.uk/shop •...
Need help?
Do you have a question about the Kalos Ibiza and is the answer not in the manual?
Questions and answers