EAS ETW8120W User Manual page 26

Remove transit bolts
Before using this washing machine,transit bolts must be removed from
the backside of this machine.Please take the following steps to remove
the bolts:
1.Loosen the four transit
bolts with a spanner
CAUTION
1.The machine must be perfectly leveled and stabilized when the four
supporting feet are close to the ground. Lower the feet as much as
possible on the basis that the machine is leveled.
2.Improper leveling adjustment may cause loud noise, machine vibrating,
machine displacement and other abnormal phenomena.
3.Air-vent is designed on the bottom of the machine (prevent blockage).
Install the washing machine on solid, smooth and skid-proof ground.
Do not place the washing machine on soft blanket or wooden floor, or
various desktops and stands, in case of unnecessary injury.
V.3
2.Take each bolt head and pull it
through the wide part of the hole.
Repeat for each bolt.
3.Fill the holes with the
supplied plastic covers.
26