Safety Instructions - CarlStahl X-LED-PS-6-C Manual Of Instruction

1 S I
AFETY NSTRUCTIONS
Devices must be installed by qualifi ed personnel in compliance with all pertaining regulations.
• Always refer to the technical parameters in the data sheet.
All items are subject to technical modifi cation.
• Before installing this product, please visit the product
page at www.x-led.de for the latest version of
installation instructions.
• Refer to the attached User Manual as a basis for correct use.
• Consult circuit diagram for correct wiring.
• Note! Before attempting any work, make sure device is separated
from main power (230 V). Protect device from moisture.
• Make sure protection against line voltage shock is provided
during installation. We recommend securing the installation by
RCD circuit brea k ers.
• Note that adjacent parts or devices must be temperature
proof up to 90°C.
• Do not operate electronic devices with inductive consumers
(fl uorescent lamps, gas discharge lamps, ventilators etc.) in
the same electric circuit. Activation of inductive consumers can
cause damage to the operating device.
• Do not place heat insulation material on the device.
• Mind the operating temperatures of the device according to the
technical data s h e et.
• Before drilling the mounting holes or cutting the lamp cutout, take
the precautions not to harm or damage any power lines underneath.
• Do not solder cable strands. Use cable strand sleeves instead.
• Note and mind voltage label on the device.
• Make sure fl awless electrical connectivity is provided.
• Do not cross primary and secondary lines.
• Do not interconnect secondary lines of power supply blocks.
• The device must only be powered up with lamp connected!
Connecting the lamp to the powered-up device can cause damage
to the lamp! (voids product warranty!)
• No modifi cation allowed. No liability will be assumed in case of
damage incurred by alteration, improper use or faulty installation.
• Protect device from moisture.
• Connection and disconnection of the line may only be carried •
out without voltage.
x-led@carlstahl-arc.com // +49 7162- 948150-300 //
X-LED-Power supply
Operating devices for X-LED-LINE
www.x-led.de
11