AEG L8WEC162S User Manual page 28

28 www.aeg.com
E.g. the washing or pre wash phase is
running:
When the phase ends the relevant
indicator stops flashing and is steady on.
The next phase indicator starts flashing.
E.g. the rinse phase is running:
During the washing cycle, the appliance
mixes the detergent, the stain removal
for fabric treatment and/or the fabric
softener with water before introducing
them into the drum; the indicator
appears and disappears on the display
according to the different programme
phases (the arrows flash alternatively).
If you select the Vapor programme the
steam phase indicator
10.11 Interrupting a
programme and changing the
options
When the programme is running, you
can change only some options:
1. Touch the button Inicio/Pausa.
The related indicator flashes.
2. Change the options. The given
information in the display changes
accordingly.
3. Touch the button Inicio/Pausa again.
The washing programme continues.
10.12 Cancelling a running
programme
1. Press the button ON/OFF to cancel
the programme and to deactivate
the appliance.
2. Press the button ON/OFF again to
activate the appliance.
Now, you can set a new washing
programme.
.
.
comes on.
If the ProSense phase is
already carried out and the
water filling is already
started, the new programme
starts without repeating
the ProSense phase. The
water and the detergent are
not drained out in order to
avoid waste.
10.13 Opening the door -
Adding garments
While a programme or the delay start
MIX
operates, the appliance door is locked.
If the temperature and level
of the water in the drum are
too high and/or the drum
still rotates you cannot open
the door.
1. Touch the button Inicio/Pausa.
In the display the related door lock
indicator goes off.
2. Open the appliance door. If
necessary, add or remove the items.
3. Close the door and touch the button
Inicio/Pausa.
The programme or the delay start
continues.
4. The door can be opened when the
programme is complete, or set
Centrif./Drenar programme and than
press Inicio/Pausa button.
10.14 End of the programme
When the programme has finished, the
appliance stops automatically. The
acoustic signals operate (if they are
active).
In the display all washing phase
indicators become steady and the time
area shows .
The indicator of the Inicio/Pausa button
goes off.
The door unlocks and the indicator
goes off.
1. Press the ON/OFF button to
deactivate the appliance.