Page 2
Overview... 3 FT1-3 Specifications ... 4 Physical ...4 User Interface...4 Connections ...4 Limited Warranty and Disclaimer ... 5 Contemporary Research FT1-3...
Page 3
• Snap-mounts into wood, metal and plastic surfaces • Operates using 1-3 always-illuminated, custom-engraved buttons, select from amber/green or red/green LEDs • Simple contact-closure operation • Design Forms available to define engraving, LED colors, finish, and cable Contemporary Research FT1-3...
Page 4
Switch Input: 1-3 closure inputs for LED feedback, 3.3K ohm pull-up to +5VDC supply Wiring: Pin 1 Chassis GND is connected to the metal bezel and should be tied to earth or airframe GND, or left unconnected. Contemporary Research FT1-3...
Limited Warranty and Disclaimer Contemporary Research Corporation (CR) warrants this product to be free from defects in material and workmanship under normal use for a period of two years from the date of purchase from CR. Should such a defect occur CR will repair or replace, at their option, the defective product at no cost for parts or labor.
Need help?
Do you have a question about the FT1-3 and is the answer not in the manual?
Questions and answers