Advertisement
For use with Bullard's DC70 cooling vest where supplied-air respiratory protection is not required.
Includes: AC1000DC or CT30DC cool tube, CH1000 connector hose, heat shield, 4612
nylon belt and HS Heat Shield.
NOTE:
The DC70 cooling vest must be purchased separately.
Function: The AC1000DC and CT30DC cool tubes provides a continuous flow of cool air to
Bullard's DC70 cooling vest. It is for use where supplied-air respiratory protection is
NOT required.
BEFOrE usINg ThIs prOducT, rEad aNd FOllOw all dIrEcTIONs aNd
warNINgs.
air Fed Vest climate control
ac1000dc/cT30dc user Manual
ac1000dc
*Vest purchased separately
cT30dc
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Summary of Contents for Bullard AC1000DC
- Page 1 HS Heat Shield. NOTE: The DC70 cooling vest must be purchased separately. Function: The AC1000DC and CT30DC cool tubes provides a continuous flow of cool air to Bullard’s DC70 cooling vest. It is for use where supplied-air respiratory protection is NOT required.
- Page 2 assembling the cooling Vest 1. Insert the muffler end of the CH1000 cooling vest connector hose well into the air entry sleeve of the vest leaving 2” of the connector hose exposed (Figure 1). Back of vest 2. Install the small nylon clamp over the air entry sleeve and cooling vest connector hose.
- Page 3 To maintain proper cooling to the vest, use Bullard V10 Series airline hose(s) in lengths of 25 ft. to 300 ft. or Bullard V5 Series airline hose in lengths of 25 ft. and 50 ft. between the cool tube’s quick-disconnect fitting and the point-of- attachment to the air supply.
- Page 4 CH1000 Cooling vest connector hose Velcro strips “V” notch 4612 belt AC1000DC/CT30DC Bullard Bullard gmbh Bullard asia pacific pte. ltd. 1898 Safety Way Lilienthalstrasse 12 LHK Building Cynthiana, KY 41031-9303 53424 Remagen 701, Sims Drive, #04-03 Toll free: 877-BULLARD (285-5273) Germany...
Need help?
Do you have a question about the AC1000DC and is the answer not in the manual?
Questions and answers