Page 2
SAFETY NOTES Dear customer, please read these Operating Instructions through carefully before connecting your device to the mains, in order to avoid damage due to incorrect use. Please pay particular attention to the safety information. If you pass the device on to a third party, these Operating Instructions must also be handed over.
Page 3
Chopper blade unit Switch II Chopper bowl Motor unit Whisk coupling unit Blender bar Whisk Chopper coupling unit Beaker Technical specifications MODEL NO HB-2070 RATED VOLTAGE 220V~50Hz RATED POWER 700W Processing guide For 500ml chopping bowl: Food Maximum (g) Operation time(sec) Meat...
Page 4
INSTRUCTIONS FOR USE Preliminary checks After removing the packaging, make sure the product is complete and undamaged and that all accessories are present. Do not use the appliance if it is visibly damaged. Contact with the technical assistance service. Connecting the appliance Check that the mains power supply voltage corresponds to the value indicated on the rating label.
Page 5
INSTRUCTIONS FOR USE Using chopper The chopper is perfectly suited for hard food, such as chopping meat, cheese, onion, herbs, garlic, carrots, walnuts, almonds, prunes etc. CAUTION: The blades are very sharp! Be very careful when handling the blade unit. Put the chopper blade unit in the chopper bowl, press down the blade unit and lock bowl.
Page 6
INSTRUCTIONS FOR USE Using whisk The whisk is intended for whipping cream,beating egg whites and mixing sponges and ready-mix desserts. Insert the whisk into the whisk coupling unit. Connect the coupling unit to the motor unit, installation reference “using blender”. Press the switch I to activate the hand blender, and press the switch II after approx 30 seconds to prevent ingredients splashing.
Page 7
If you have any question with the product, please contact us with Email or Telephone, we will find a satisfied solution for you. Email Website Phone Service@Freihafen.shop www.Freihafen.shop 0049-040-69638976-8...
Need help?
Do you have a question about the HB-2070 and is the answer not in the manual?
Questions and answers