Summary of Contents for TQB RL12TPB
- Page 1 Mar-19 Product Code: RL12TPB OWNER’S MANUAL PRODUCT CODE: RL12TPB HYDRAULIC PIPE BENDER 12,000KG Made in China to TQB Brands Pty Ltd specifications Visit us at www.tqbbrands.com.au...
-
Page 2: Table Of Contents
Keep this manual in a convenient and safe place for future reference. Whilst every effort has been made to ensure accuracy of information contained in this manual, the TQB Brands policy of continuous improvement determines the right to make modifications without prior warning. -
Page 3: Safety Instructions
Hydraulic Pipe Bender was designed. Do not modify the Hydraulic Pipe Bender and do not use the Hydraulic Pipe Bender for a purpose for which it was not intended. Made in China to TQB Brands Pty Ltd specifications Page 3... -
Page 4: Assembly, Operation & Preventative Maintenance
Packing pipe with clean sand, then capping off ends with steel caps before bending. Note: To prevent injuries from burns do not heat pipe. Made in China to TQB Brands Pty Ltd specifications Page 4 Visit us at www.tqbbrands.com.au... - Page 5 Note: use only with pipe that fits the bending die exactly. Pipe will deform significantly if it does not fit the bending die exactly. Made in China to TQB Brands Pty Ltd specifications Page 5 Visit us at www.tqbbrands.com.au...
- Page 6 Reinstall the oil filler plug. Clean with a clean cloth using a mild detergent. Always store the hydraulic pipe bender in a safe, dry location. 5. STORAGE Made in China to TQB Brands Pty Ltd specifications Page 6 Visit us at www.tqbbrands.com.au...
- Page 7 Made in China to TQB Brands Pty Ltd specifications Page 7 Visit us at www.tqbbrands.com.au...
-
Page 8: Troubleshooting
3. Over extended the ram. 3. Replace lifter. Ram will not extend to full 1. Low oil level. 1. Add hydraulic oil to the range of stroke lifter. Made in China to TQB Brands Pty Ltd specifications Page 8 Visit us at www.tqbbrands.com.au... -
Page 9: Parts List
1/2" Bending Die Washer 3/4" Bending Die Bolt 1" Bending Die Spring 1-1/4" Bending Die Spring Base 1-1/2" Bending Die Circlip 2" Bending Die Cotter Pin Made in China to TQB Brands Pty Ltd specifications Page 9 Visit us at www.tqbbrands.com.au... -
Page 10: Warranty
This guarantee applies in lieu of any other guarantee expressed or implied and variations of its terms are not authorised. Your TQB Brands Pty Ltd guarantee is not effective unless you can produce upon request a dated receipt or invoice to verify your proof of purchase within the 12 month period.
Need help?
Do you have a question about the RL12TPB and is the answer not in the manual?
Questions and answers