Advertisement
Quick Links
WORKING INSTRUCTION
Step 6 : Press right lever (#2) toward left for achieving any angle
from 0 to 180°. If specified angle is required then stop bending while
bending point reaches at angle as shown in fig.3. i.e 90°
BENDING POINT
LOCK (#4)
Step 7 : Copper Tube Bender is suitable for copper
LOCK (#4)
COPPER TUBE
Fig. 4
Page # 3 - M:208
RIGHT LEVER (#2)
COPPER TUBE
DIE (#1)
LEFT LEVER (#3)
tube bending having thin wall thickness upto
180° as shown in fig.4
LEFT LEVER (#3)
RIGHT LEVER (#2)
WARNING
1. Don't use bender more than its capacity.
2. If tube is over size, the die will damage
the tube.
3. Don't use heavy thickness tube bending.
User's Instruction Manual
Model : P-208
Note : Before using this COPPER TUBE BENDER carefully read through
this INSTRUCTIONS MANUAL to ensure efficient, safe operation. It is
recommended that these INSTRUCTIONS be kept readily available as an
important reference when using this COPPER TUBE BENDER.
Advertisement
Related Manuals for Inder P-208
Summary of Contents for Inder P-208
- Page 1 LEFT LEVER (#3) LOCK (#4) COPPER TUBE User’s Instruction Manual RIGHT LEVER (#2) Model : P-208 Fig. 4 WARNING 1. Don't use bender more than its capacity. Note : Before using this COPPER TUBE BENDER carefully read through 2. If tube is over size, the die will damage this INSTRUCTIONS MANUAL to ensure efficient, safe operation.
- Page 2 Step 3 : O.D. of tube should be same as the die size. RIGHT LEVER (#2) Product COPPER TUBE BENDER Identification Type Designation : P-208 DIE (#1) LIMITED ONE YEAR WARRANTY AGAINST MANUFACTURING DEFECT. LEFT LEVER (#3) Makes every effort to assure that its Copper Tube Bender meet high...