Choose How You Want To Install The Desk Mount; A) C-Clamp Installation On The Edge Of The Desk - ONKRON G70 User Manual

1. Choose how you want to install the desk mount:

a) C-Clamp installation on the edge of the desk:

Take the C-Clamp (B), it consists of two details connected with two bolts. If
your desk thickness is 1.3" – 3.1" (35~80mm) use two lower holes, if 0.3" – 1.7"
(10~45mm) use two upper holes. Put plastic cover (C) onto C-Clamp (B), as shown.
Attach the tube (E) to the C-Clamp (B) using three bolts (H). Key (K) is needed.
Install the whole construction onto the table and tighten the clamp, by spinning the
knob. Key (L) may be used. Make sure it is securely fixed on the table.
4
35-80mm
1.3" -3.1"
10-45mm
1.3" -3.1"
H