Advertisement
Quick Links
Advertisement
Related Manuals for BORRESEN 01
Summary of Contents for BORRESEN 01
- Page 1 BØRRESEN BØRRESEN User Manual BØRRESEN BØRRESEN LOUDSPEAKER BØRRESEN...
- Page 2 Also check that the serial number matches the serial number, stated in your invoice. Unpacking and assembling the BØRRESEN 01 ......4 Please contact your dealer if there is no serial number on the invoice, if the serialnumber on the invoice is wrong or if there is Unpacking the BØRRESEN 02, 03 and 05 .........
- Page 3 To achieve the best performance i recommend that you carefully read this guide before setting up your new loudspeakers. More information is available on Michael Børresen, www.borresen-acoustics.com CVO and Co-founder of BØRRESEN Acoustics...
- Page 4 Unpacking: Please consult your BØRRESEN dealer who in most cases will unpack and set up your new product. To unpack the BØRRESEN 01 - stands : 1. Carefully lay the transport boxes flat on a plane floor. 2. Open the outer box, do not use knife or sharp instruments to break the tape.
- Page 5 What is in the boxes In one box you find your B01 speakers. Both speakers will be in one box. In this box you can also find the Darkz decouplers , in the quality level ordered with the speakers. The box will also contain a pair of white gloves, please use them when handling the speakers and stands (take care not to drop...
- Page 6 Unpacking the BØRRESEN 02, 03 and 05 loudspeakers BØRRESEN Loudspeaker models are protected during transport by 1. Carefully lay the transport box flat on a plane floor stable and secure packaging. 2. Remove the straps from the outer carton and pull the lid to reveal Due to their weight and dimensions, they are shipped in a special, dou- the inner box.
- Page 7 5. Now, Lift the box to an upright position 7. Still wearing the white gloves, put the speaker to the position 6. Pull the speaker and the protective foam out of the box, sliding you desire it on the bottom foam. Be carefull not to tilt 8.
- Page 8 Positioning The sound from speakers depends very much on the room and on the way they are set up. Please consult your dealer for advice on how to setup your Børresen speakers in your home. These guidelines are general and will give you a good starting point for further experimenting in finding out what is just the right setup for your room.
-
Page 9: Connecting The Loudspeakers
Connecting the loudspeakers Note: 1. Connect a two-pole (+/-) • With every connection system, ensure that the contact is tight and loudspeaker cable to the binding has a proper contact area. posts, located at rear of the • Connectors with gold plating will typically offer the best results loudspeaker and remain corrosion-free. -
Page 10: Choice Of Loudspeaker Cable
Connecting BØRRESEN 05 to 15 V DC power Choice of loudspeaker cable Your new BØRRESEN 05 loudspeaker comes with a powersupply you The impact a high quality speaker wire have on sound quality can be must connect to the speaker according to dramatic. -
Page 11: Maintenance
Important Running in new loudspeakers • Let the speaker reach room temperature before plugging All new high quality loudspeakers need a certain period of running-in it in. Condensation may arise in the electronic circuitry when time. As BØRRESEN Loudspeakers uses long-stroke bass driver with moving the speaker from cold to warm surroundings. - Page 12 The sonic improvement caused by Darkz is undeniable and addictive. Darkz are available in 4 Quality levels; D·TC, D2, C and A. Darkz can be easily fixed under the any of the BØRRESEN loudspeakers. www.borresen-acoustics.com Ask your dealer for a demonstration...
Need help?
Do you have a question about the 01 and is the answer not in the manual?
Questions and answers