Advertisement
Available languages
Available languages
Wall Mount S / M / XL
#49396 / #493961 / #493962
a
MOUNTING INSTRUCTIONS
For mounting VESA 75/100 compatible LCD televisions on a vertical wall.
Tilts / swivels your television up to 15 degree in either direction.
Do not install if parts are missing or defective.
Improper installation may cause damage or serious injury.
CONTENT:
1x Monitor Mount (a)
2x Wall Plate (b)
4x M4x10 Bolt (c)
1x Knob (d)
2x Lag Bolt (e)
1x Cap (f)
STEP 1:
Attach the monitor mount (a) to the back of your LCD television using the M4x10 bolt (c) (fig. 1).
STEP 2:
Hardware for wood stud mounting is provided. Use the wall plate (b) to mark the position of the two holes on the wall, aligned
vertically and centred on the stud. Pre-drill to a depth of 2.5 inches. Attach the wall plate to the wall using the two lag bolts (e) (fig. 2).
STEP 3:
Set the tapered hole in the monitor mount (with monitor attached) down over the cone-shaped bushing on the wall plate
(as in fig. 3, shown WITHOUT monitor for better view).
Add the cap (f) and make sure the square cut in the cap fits over the square top of the wall plate bushing.
Place the knob (d) on the cone-shaped bushing. Turn the knobs to the desired level of tension.
UK - WARRANTY:
The warranty period is 36 months. Reimo reserves the right to rectify eventual defaults. The guarantee is excluded for all damages caused
by faulty use or improper handling.
Liability limitations: In no case Reimo will be reliable for collateral-, secondary- or indirect damages, costs, expenditure, missed benefits
or missed earnings. The indicated sales price of the product is representing the equivalent value of Reimo's liability limitations.
REIMO REISEMOBIL-CENTER GMBH
63329 EGELSBACH · BOSCHRING 10 · GERMANY · WWW.REIMO.COM · MADE IN CHINA
b
REQUIRED TOOLS:
Drill with 3/16 inch bit
Phillips screw driver
EN
c
Advertisement
