Advertisement
Quick Links
SnoClip
™
This aluminum component retards the
migration of snow and ice beneath the
ColorGard® crossmember or SnoFence™
and SnoRail™ systems. It has a special
integrated rubber "foot" to prevent
abrasion of the panel's finish. SnoClip™
slides onto the back of the crossmember
or rod and extends down to the flat of
the roofing panel.
IMPORTANT NOTICE! — SnoClip™
design has changed. SnoClip must now
slide on from the end of the ColorGard
crossmember. Be sure to slide SnoClip
onto assembly before attaching
crossmember to clamps. A retrofit
SnapClip™ is also available from your
authorized S-5!® distributor.
Advertisement
Summary of Contents for S-5! SnoClip II
- Page 1 SnoClip ™ This aluminum component retards the migration of snow and ice beneath the ColorGard® crossmember or SnoFence™ and SnoRail™ systems. It has a special integrated rubber “foot” to prevent abrasion of the panel’s finish. SnoClip™ slides onto the back of the crossmember or rod and extends down to the flat of the roofing panel.
- Page 2 Slide SnoClip™ onto ColorGard® during installation. One or two clips are used between seams (please visit SnoClip II™ has two locks and is designed for seam www.S-5.com for details). Slide the SnoClip onto the heights of 1" (25 mm) and 1-3/4" (44.5 mm) snap. It will back of the crossmember or rod (on SnoFence™, use...