SPI Infrared M2D Manual

Gyro stabilized gimbal ball turret for suas, uav, multicopter, hexacopter, unmanned drones cameras' pinout

Hide thumbs

Table Of Contents

M2D Gyro Stabilized

Gimbal ball turret for

Suas, UAV, multicopter,

hexacopter, unmanned

drones Cameras' Pinout

Ver 1.0

This document is the property of Sierra Pacific Innovations Corp ("SPI

Corp"). SPI Corp reserves all rights to this document, data, invention, and

content herein described. This document is confidential, including the fact

of its existence and is not to be disclosed, in whole or in part, to any other

party and it shall not be duplicated, used, transmitted or copied in any form

Table of Contents

Need help?

Do you have a question about the M2D and is the answer not in the manual?

Questions and answers

Summary of Contents for SPI Infrared M2D

Page 1 M2D Gyro Stabilized Gimbal ball turret for Suas, UAV, multicopter, hexacopter, unmanned drones Cameras’ Pinout Ver 1.0 This document is the property of Sierra Pacific Innovations Corp (“SPI Corp”). SPI Corp reserves all rights to this document, data, invention, and content herein described.
Page 2 without the express prior written permission of SPI Corp. Acceptance of this document will be construed as acceptance of the foregoing conditions.
Page 3 Cameras’ Pinout Ver 1.0 www.x20.org Compilation and Publication Notice This manual is covering the latest product descriptions and specifications. It is our policy to constantly improve the design and specifications. Accordingly, the details represented herein cannot be regarded as final and binding.
Page 4 Cameras’ Pinout Ver 1.0 www.x20.org Table of Content Overview ..................4 Connector..................4 Numbering plan ................... 4 Pin Assignment ..................5 Power Supply ..................6 - Page 3 of 6 – - SPI Corp Proprietary and Confidential Information -...
Page 5 Cameras’ Pinout Ver 1.0 www.x20.org 1 Overview The document describes the pinout of the M2-D camera. 2 Connector The cameras are interfaced using single 1.25mm pitch 10-pin header connector (Molex 53047-1010) which carries power, control and video signals. The wire harness connecting to the camera should include Molex (51021-1000) (10 pos / 1.25mm) connector.
Page 6 Cameras’ Pinout Ver 1.0 www.x20.org The numbering plan of the cable connector (Molex 51021-1000) is depicted in Figure 2: Figure 2: Wire Housing Connector Numbering Plan 2.2 Pin Assignment The pin assignment is depicted in the following table: Pin NAME Description SYS_PWR System Power Input...
Page 7 Cameras’ Pinout Ver 1.0 www.x20.org System Ground VIDEO_OUT OUT Video Out (PAL or NTSC) VIDEO_GND - Video Ground 2.3 Power Supply Note Power supply range is specified at camera connector. One should consider the voltage drop on the wires connecting the camera to the power supply.