Gainsborough H264 Instructions

200 LED Copper Firefly Solar Lights
H264
v002: 21/07/21
Please read and retain these instructions for future reference

ASSEMBLY INSTRUCTIONS / INSTRUCTIONS FOR USE:

Unpack the components carefully. Please check all parts have been removed from the packaging.
To easily insert stakes into the ground, it is recommended to wet the ground first. To avoid damaging garden
stakes when inserting into the ground, select a spot in soft, rock-free soil. Insert the base of the stake first
then gently insert the rest of the stake into the base. DO NOT push directly against the solar cell or the
ornament housing containing the actual LED light.
Find an ideal Place for the Solar Light.
Place the solar light in an area where it will receive direct sunlight for at least 8 hours per day. The number of
hours the light will illuminate is directly proportional to the hours of sunlight it receives. If the light is placed
in a shaded area, it will not be able to fully charge and its illumination time will be limited. Do not place the
light near other outdoor lighting like porch or streetlights. These may fool the sensor and keep the light from
coming on, or cause it to turn off automatically

PARTS LIST

➀ 1 x electronic control box with LED strand
➁ 1 x ground tube
➂ 1 x pointed ground stake
ALWAYS POSITION IN DIRECT SUNLIGHT
Dimensions
LIGHT CHAIN LENGTH 19.9M, LEAD WIRE (BETWEEN LIGHT
STRING AND SOLAR PANEL 2M), TOTAL LENGTH 21.9M
•
ADD A SCATTERING OF MAGIC TO YOUR GARDEN
•
THESE FIREFLY SOLAR LIGHTS ARE MADE UP OF 200
MICRO LEDS (not replaceable) ON A COPPER WIRE,
YOU CAN WRAP AROUND TREE'S, BUSHES, POLES,
FLOWERS ETC SO ARE HIGHLY VERSATILE
•
SOLAR POWERED AND WITH 8 DIFFERENT LIGHT
SETTINGS
•
AUTOMATICALLY TURN ON AT NIGHT
•
CREATES A MAGICAL DISPLAY AT NIGHT WHEN THEY
AUTOMATICALLY TURN ON
Battery: 1x AA 1.2v 800Mah, Ni-MH, Rechargeable