Haier LE32D2320 Service Manual page 13

AUDIO
1. Sound Mode : Use the [CH-] or [CH+] buttons to highlight one of the following options, then press[ENTER] to
enter the sub-menu and press[VOL-] or [VOL+] to adjust.
[User] – Allow you to store your preferred settings.
[Standard] – Select for standard sound settings. Recommended for home entertainment.
[Soft] – Select for soft sound settings.
[Dynamic] – Select for dynamic sound settings.
Note: Changing the settings below will automatically change the Sound Mode to User.
2. Balance: Adjust the level of sound coming from the left and right speakers. Press [VOL-] to shift the balance
and emphasize the left speaker. Press [VOL+] to shift the balance and emphasize the right speaker.
3. Bass:Adjust the low frequency sounds.Press [VOL-] to decrease bass. Press [VOL+] to increase the bass.
4. Treble: Adjust the high frequency sounds.Press [VOL-] to decrease treble. Press [VOL+] to increase the treble.
5. Sound Surround:
[Off ] – Set surround sound off.
[On] – Set surround sound on.
6. Digital Audio Output:
[Off ] – Set the audio output type of coax or optical terminal off.
[RAW] – Output the original format of the audio stream.
[PCM] – PCM can be matched with most AV amplifiers.
1. Auto Volume Control : Use the [CH-] or [CH+] buttons to highlight one of the following options, then press
[ENTER] to enter the sub-menu and press[VOL-] or [VOL+] to adjust.
[Off ] – Set the auto volume control off.
[On] – Set the auto volume control on.
All manuals and user guides at all-guides.com
13