Advertisement
Quick Links
NavNet TZtouch3 FAQ
1. NavNet TZtouch3 System Overview
Q1.SYS
Which models are in the NavNet TZtouch3 product range?
Q2.SYS
How many NavNet TZtouch3 MFDs are allowed in one network?
Q3.SYS
Does one NavNet TZtouch3 MFD need to be set as a Master?
Q4.SYS
Which charts are pre-installed on the 256GB Micro SD-Card in TZtouch3?
Q5.SYS
Which PGNs are supported by TZtouch3?
Q6.SYS
Does NavNet TZtouch3 have a built-in operator's manual?
Q7.SYS
What type of connections does the TZtouch3 MFDs have?
Q8.SYS
What type of connections are available on the Multi-cable port?
Q9.SYS
Does TZtouch3 MFDs come with built-in GPS
Q10.SYS
Does NavNet TZtouch3 have built in NMEA0183 functionality?
Q11.SYS
Does TZtouch3 have a demo mode?
Q12.SYS
Can I use polarized glasses with a TZtouch3 MFD?
Q13.SYS
Is TZtouch3 compatible with hotspot sites that require web login or authentication?
Q14.SYS
Is TZtouch3 compatible with the Active Captain POI database?
2. NavNet Tztouch3 Ports and Connections
Q1.CON
Can Engine, Tank and Fuel data be displayed on the TZtouch3 MFD?
Q2.CON
Is a special Ethernet Hub required for use with TZtouch3 networks?
Q3.CON
Can standard PC monitors be used with TZtouch3 MFDs for remote displays?
3. NavNet TZtouch3 Compatibility
Q1.COMP
Can I mix TZtouch2 and TZtouch3 MFDs in a single network?
Q2.COMP
Are NavNet 3D and TZtouch1 networks compatible with NavNet TZtouch3?
Q3.COMP
Are Furuno Commercial Radars, such as the FAR2XX7, FAR2XX8, FR15X8, and FR15X3
compatible NavNet TZtouch3?
Q4.COMP
Can an FCV1150 Sounder be connected networked to the NavNet TZtouch3?
Q5.COMP
Can I control a SiriusXM Satellite Radio (audio channels) using NavNet TZtouch3?
Q6.COMP
Is TZtouch3 be compatible with Nobeltec TimeZero (TZ) software?
Q7.COMP
Are the NavNet TZtouch3's compatible with Fusion radios?
Q8.COMP
Is TZtouch3 compatible with CZone Digital Switching Systems?
Q9.COMP
Which Remote Controllers are compatible with TZtouch3 Networks?
Rev 3/4/2020 v16
Advertisement
Summary of Contents for Navnet TZtouch3
- Page 1 Which models are in the NavNet TZtouch3 product range? Q2.SYS How many NavNet TZtouch3 MFDs are allowed in one network? Q3.SYS Does one NavNet TZtouch3 MFD need to be set as a Master? Q4.SYS Which charts are pre-installed on the 256GB Micro SD-Card in TZtouch3? Q5.SYS Which PGNs are supported by TZtouch3? Q6.SYS...
- Page 2 Which Apps are compatible with TZtouch3 MFDs? 8. Installation and Retrofit Q1.INST What type of display mounting options are available for NavNet TZtouch3 MFDs? Q2.INST Will NavNet TZtouch3 MFDs fit in NavNet 3D or NavNet 1/vx2 MFD Console cut outs?
- Page 3 How many NavNet TZtouch3 MFDs are allowed in one network? Any combination of up to six (6) TZtouch3 and/or TZtouch2 MFDs are allowed in one network. Or four (4) MFDs and one TZT2BB. If a Nobeltec PC is included, it is counted as one MFD in the network.
- Page 4 Q7.SYS What type of connections does the TZtouch3 MFDs have? TZT12F TZT16F and TZT19F The differnce between the TZT12F and the TZT16F/19F is the addition of an HDMI input port along with a USB Passthrough port.
- Page 5 Does TZtouch3 have a Demo Mode? Yes. TZtouch3 has both a tutorial video as well as built in demo files. The start-up screen has three selections. Play a demo file [Demo Mode Start], a tutorial [Start Tour], or Navigate [Lets Navigate].
- Page 6 Can Engine, Tank and Fuel data be displayed on the TZtouch3 MFDs? Yes. TZtouch3 MFDs have extensive and fully customizable Engine and Data Monitoring pages. Certain engine, tank and fuel data (up to 4) in NMEA2000 format may be displayed on any MFD in the Network.
- Page 7 While standard monitors can be used, it is recommended that the monitor be tested with the TZtouch3 MFD before it is mounted to see if it is compatible. TZtouch3 does not support proprietary drivers, such as 10-point touch features. TZtouch3 supports dual point touch only.
- Page 8 Q10.COMP Can additional USB devices be connected using a generic USB Hub? Yes. TZtouch3 has a powered 5V USB port that can supply up to 0.5 Amps to any generic USB Hub. This will allow you to connect additional USB devices, such as the SDU001 Chart Card Reader, MCU002, MCU004 USB Remotes, USB Memory Stick, Mouse, keyboard, etc.
- Page 9 What type of video inputs are available? TZtouch3 MFDs have two (2) Analog inputs. Up to four (4) Axis IP cameras and two (2) Axis Quad Video servers are supported. Additionally, the TZT16F and TZT19F have one (1) HDMI IN...
- Page 10 Which Apps are compatible with TZtouch3 MFDs? TZtouch3 is compatible with the Android Controller App, Android/Apple iOS Viewer Apps, and the Android/Apple iOS remote app, TZ (TimeZero) iBoat, and the new for TZtouch3, First Mate app. Click here for the iOS and Android Apps guide.
Need help?
Do you have a question about the TZtouch3 and is the answer not in the manual?
Questions and answers