Table of Contents
Advertisement
2. Insert the plug into the socket.
Setting the temperature
➤Turn the temperature control knob to the
desired position (see fig. 2, page 4).
Cooking and frying food
A
NOTICE!
Do not use any metal utensils as this
could damage the non-stick coating of
the griddle plate.
I
NOTE
• The griddle plate needs about
10 minutes for heating up.
• Cooking time depends on the nature
and size of the food and your personal
preference.
• To avoid the food drying out, turn the
food only once.
Switching off
1. Unplug the device from the socket.
2. Ensure that the device is fully cooled down
before leaving the device unattended.
After each use
➤Clean the griddle plate (see chapter "Cleaning
and maintenance" on page 7).
Cleaning and maintenance
!
WARNING!
Electrocution hazard
• Unplug the griddle from the socket
before cleaning and maintenance.
Burn hazard
• Ensure that the device is fully cooled
down before cleaning.
A
NOTICE!
• Never clean the griddle under running
water or in dish water.
• Do not use sharp or hard objects, abra-
sive cleaning agents or bleach during
cleaning as these can damage the
griddle.
Removing food residues
➤After each use, remove food residues with a
paper towel or a damp cloth.
FryUp only:
1. Place a receptacle suitable for collecting liquid
next to the griddle.
2. Pour excess liquid from the griddle plate into
the receptacle (see fig. 3, page 4).
FryUp XL only:
1. Pull out the drip tray (see fig. 4, page 4).
2. Empty the drip tray.
3. Clean the drip tray with a soft, damp cloth and
a mild cleaning agent.
Cleaning the griddle plate
➤Clean the griddle plate with a soft, damp cloth
and a mild cleaning agent.
Storing the electric griddle
1. Before storing, clean the griddle (see chapter
"Cleaning and maintenance" on page 7).
2. Allow the griddle to dry completely.
3. Store the griddle in a dry place.
Warranty
The statutory warranty period applies. If the
product is defective, please contact the
manufacturer's branch in your country (see
kampaoutdoors.com/store-locator) or your
retailer.
For repair and warranty processing, please include
the following documents when you send in the
device:
• A copy of the receipt with purchase date
• A reason for the claim or description of the fault
4445103347
7
Advertisement
Table of Contents
