Compex PoE Plus Technical Specifications

datasheet
product
Supports both 10
or 100Mb ps
network
connectivity to a
Wireless Access
Point
Allows Wireless
Access Point to be
deployed without a
nearby power
source
Compex Systems Pte Ltd
135 Joo Seng Road,
#08-01
PM Industrial Building
Singapore 368363
tel: (65) 6288 8220
fax: (65) 6280-9947
www.compex.com.sg
Compex Inc, USA.
840 Columbia Street,
Suite B Brea. CA 92821
tel: (714) 482 0333
fax: (714) 482-0332
www.cpx.com
Copyright © 2007 Compex Systems. All rights reserved. COMPEX and the COMPEX logo, are registered trademarks of COMPEX Inc. While every effort is
made to ensure the information is accurate, Compex does not accept liability for any errors or mistakes that may arise. All specification is subject to change
without notice. Datasheet Version: 1.3
Compex PoE PLUS
PoE+ 1A4815 6A4815,
PoE+ 1P4830 6P4830,
The Compex PoE+ (1A/6A4815) is an IEEE 802.3af compatible high po er active
injector designed for wireless Access Points. Supporting an output power f 15 W.
The Compex PoE+ (1A/6A4825) high power active injector supports a higher output
power of 25 W. It supports the same IEEE 802.3af handshake protocol as Compex
PoE+ (1A/6A4815) but has a higher current power source and a higher cur ent cutoff
setting.
The Compex PoE+ (1P/6P4830) is a high power passive injector that supports an
output power of 30W. This injec
receiving equipment can be damaged by this injector.
The Compex PoE+ (1P/6P0000) is the injector of 1P/6P4830. The only di ference is
that it does not include the 48V power supply. The output power will then epend on
the power rating of the power supply that you choose to use (Up to 30W).
Advanced Auto-Sensing Algorithm (Only for 1A/6A4815 and 1A/6A4825)
Advanced Auto-Sensing Algorithm will provide power only to IEEE 802.3af compatible
equipment.
Cost Effective
Compex PoE Plus are cost–effective solution for deploying Wireless Access Point in indoor
or outdoor environments where power source is not readily available or power cables are
not permitted.
TECHNICAL SPECIFICATIONS
PoE+
Model
(1A/6A4815)
Active or Passive Acitve
Output Power 48V / 15W
802.3af COMPLIANCE Yes
Power Supply Included Yes
STANDARD COMPLIANCE
IEEE 802.3 10BASE-T, IEEE 802.3u 100BASE-TX
INTERFACE
Injector: 2 X RJ45 port,
1 X Power Supply Connector
NETWORK MEDIA
10BASE-T Ethernet: UTP Cat. 3,4,5, Unshielded Twisted Pair (UTP) Cable
100BASE-TX Fast Ethernet: UTP Cat. 5, Unshielded Twisted Pair (UTP) Cable
DATA TRANSFER RATE
10 / 100 Mbps
LED INDICATORS
Injector: Remote Power, Local Power
TEMPERATURE
o
Operating: 0 ~ 40 C Storage: -10 – 70
DIMENSION (Without supplied Power Adapter)
220x25x22mm
CONFIGURATION CODES
PoE+ 1A (leaded)
PoE+ 6A (RoHS)
*
802.3af handshake protocol compatible but exceeds standard cut-off current ratings.
PoE+ 1A4825 6A4825,
PoE+ 1P0000 6P0000,
tor is not IEEE802.3af compatible, In
PoE+ PoE+
(1A/6A4825) (1P/6P4830)
Active Passive
48V / 25W 48V / 30W
Yes* No
Yes Yes
o
C
PoE+ 1P (leaded)
PoE+ 6P (RoHS)
w
o
r
compatible
f
d
PoE+
(1P/6P0000)
Passive
48V / (Up to 30W)
No
No