Silex technology X-5 Frequently Asked Questions

Hide thumbs Also See for X-5:

Table of Contents

Download this manual

X-5 Frequently Asked Questions

Question: What is the distance the receiver can be from the transmitter?

Answer: X-5 uses standard 802.11n protocols. In a typical environment, the distance is about 100 feet in an

open environment. It could be less if there is interference or possibly more if it is open air and line of sight.

Question: What wireless standard is used?

Answer: The X-5 is compatible with 802.11a/b/g/n. It supports either the 2.4GHz or 5GHz band. 5GHz is the

default and is recommended so it won't have interference with other wireless devices.

Question: What is the Maximum Resolution and Frame Rate for the Video?

Answer: The product supports Full HD 1920 x 1080 resolution at up to 30 frames per second.

Question: What types of video cable connections to the display does X-5 support?

Answer: The product supports DVI-I. It has a DVI connector, and can connect to either digital or analog video

connections. You can use a DVI-I to HDMI cable to connect to an HDMI digital display, a DVI-I to VGA cable to

connect to a VGA (15 pin) analog display, or simply a DVI to DVI cable to connect to a DVI enabled display. In

all formats, the audio is analog and you will need a 3.5mm audio connection.

Question: What is the Maximum Resolution and Frame Rate for the Video?

Answer: The product supports Full HD 1920 x 1080 resolution at up to 30 frames per second.

Table of Contents

Need help?

Do you have a question about the X-5 and is the answer not in the manual?

Page 1 Question: What is the distance the receiver can be from the transmitter? Answer: X-5 uses standard 802.11n protocols. In a typical environment, the distance is about 100 feet in an open environment. It could be less if there is interference or possibly more if it is open air and line of sight.
Page 2 2. Please confirm the data size for the frame data. Try a smaller data size to see if there is any improvement. 3. Make sure your PC is not connected to the same Wireless LAN as the X-5 Transmitter. PCs can cause interference to the transmitter.
Page 3 If you want to connect to HDMI, you will need an HDMI to DVI cable. If you want to connect to 15 pin VGA connection, you will need a DVI to VGA cable. The default mode of the X-5 is digital, so if you are using analog, you will...