Power Fist 8915811 Manual

V1.0

SPECIFICATIONS

Voltage Rating 12V
Current Rating 0.35A
Wattage 4W
Temperature Rating 140°F (60°C)
Motor Speed 2,500 RPM
Material ABS/Polypropylene
Base Type Suction cup, rotating 360°

SAFETY

WARNING! Read and understand all instructions before
using this tool. The operator must follow basic
precautions to reduce the risk of personal injury and/or
damage to the equipment.
Keep this manual for safety warnings, precautions, operating
or inspection and maintenance instructions.
1. Use the correct tool for the job. This tool was designed
for a specific function. Do not modify or alter this tool or
use it for an unintended purpose.
2. Control the tool, personal movement and the work
environment to avoid personal injury or damage to tool.
3. Do not operate any tool when tired or under the
influence of drugs, alcohol or medications.
4. To reduce the risk of fire or electrical shock, do not
expose the unit to water or rain.
5. Never insert fingers or any other objects through the grill
guard when the fan is in operation.
6. Always unplug the heating unit when not in use.
7. The heater becomes hot when in use, allow the heater to
cool down before attempting to move the unit.
Please read and understand all instructions before use. Retain this manual for future reference.
8. Check the power cord and plug carefully before use to
make sure that they are not damaged.
9. To prevent a possible fire, do not block air intakes or
exhaust in any manner.

UNPACKING

WARNING! Do not operate the tool if any part is missing.
Replace the missing part before operating. Failure to do
so could result in a malfunction and personal injury.
Remove the parts and accessories from the packaging and
inspect for damage. Make sure that all items in the contents
are included.
Contents: • Heater/defroster • Suction Cup Mounting Kit

IDENTIFICATION KEY

A Power Cord with Plug
B LED
C Switch
D Housing
E Air Outlet
F Louvers
G Bracket
H Suction Cup

OPERATION

1. Press the sucker (H) onto a smooth surface near the
12VDC power outlet.
2. Plug the 12VDC plug (A) into the outlet. The LED (B) will
glow to indicate the heater has power.
3. Turn the switch (C) to Heat or Fan.
4. Turn the switch back to OFF and unplug when the task is
complete.
CARE & MAINTENANCE
1. Maintain the tool with care. A tool in good condition is
efficient, easier to control and will have fewer problems.
2. Inspect the tool components periodically. Repair or
replace damaged or worn components. Only use identical
replacement parts when servicing.
3. Unplug the device before cleaning.
WARNING! Only qualified service personnel should
repair the tool. An improperly repaired tool may present
a hazard to the user and/or others.

TROUBLESHOOTING

Visit a Princess Auto Ltd. location for a solution if the tool
does not function properly or parts are missing. If unable to
do so, have a qualified technician service the tool.
8915811