Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Summary of Contents for MC Smart Controls FL-1000
- Page 1 Full Product Manual FL-1000...
-
Page 2: Table Of Contents
Table of Contents INSTALLATION Location Mounting and Installation Connecting the Power SETUP Communicating with the FL-1000 User Interface Home Page Communications Configuration Page FL-1000 User APP Pre-Delivery/Install Checklist 9. Troubleshooting 10. Warranty and Disclaimer... -
Page 3: Installation
Location ➢ Select a location at least 6 inches or more after the main shutoff for the installation of the FL-1000 sensor. Make sure that the location you select in the main line after the shutoff valve is before the pipe branches off. -
Page 4: Communicating With The Fl-1000
Option 1: Connect to the FL-1000 as a WIFI network While standing within 50 feet of the FL-1000 unit with a smart device. Look for local WIFI network named FL-1000_xxxxxx = the last four characters of the specific FL-1000’s MAC address. - Page 5 Test Button- Pressing the “Test” button will test for leaks manually within 10 seconds. Start Time- This is the time window the user sets. This time window will be the time period in which the FL-1000 will test for leaks in auto mode.
-
Page 6: Communications Configuration Page
Communications Configuration Page WiFI Station- This menu is where you configure and connect to your home local WIFI network WiFi Access Point- This menu is where you configure your communication parameters for the FL-1000 WIFI network. -
Page 7: Fl-1000 User App
FL-1000 User APP The APP can be downloaded for free and used to Access the specific controller locally via the local FL-1000 user interface access point or globally over the internet... -
Page 8: Pre-Delivery/Install Checklist
Pre-Delivery/Install Checklist FL-1000 Leak/Freeze Sensor 2) 24 VDC power Adapter... -
Page 9: Troubleshooting
If after rebooting the unit you still cannot Reboot the FL-1000 smart device see the FL-1000 network or connect to it the unit is defective. If WIFI network does not show up in Smart Try to connect to the FL-1000 Device WIFI network list the processor or User Interface. -
Page 10: Warranty And Disclaimer
Warranty and Disclaimers WARRANTY Mani Group warrants that each product will be free of defects in material and workmanship for a period of three (3) years for its products. The warranty commences on the date the product is shipped by Mani Group. Mani Group’s sole liability and responsibility under this warranty is to repair or replace any product which is returned to it by the Buyer and which Mani Group determines does not conform to the warranty.
Need help?
Do you have a question about the FL-1000 and is the answer not in the manual?
Questions and answers