How To Erase Programmed Codes; How To Find Out Which Code Is Currently Programmed - Steren RM-8 User Manual

7.- Press Power once again to check that your device turns on. Test the
remote control functions, it must to control almost the total of functions,
otherwise repeat the instructions.
Be patient. If your device don't turn off after few tries pressing
Power, repeat from step 2.
Do not press different buttons as we mentioned in this instruction
This kit is ideal for electronic students or hobbyists because
manual.
it allows them to develop creativity in the programming of
Do not exceed more than 30 seconds between each step.
this prototype of a mechanical system. This kit includes all
Otherwise the remote control exit from the Search mode and you
must to repeat from step 2

HOW TO ERASE PROGRAMMED CODES

If you want to erase a specific code, you can use the quick program
method or the automatic search method; when you enter the new code,
automatically will erase the old code.
HOW TO FIND OUT WHICH CODE IS CURRENTLY
PROGRAMMED
Once you have set your remote control and control your device, you can
blink back your setup code for future reference, even if you used the
Automatic Search Method or the Quick Program Method.
In order to know a specific device code:
1.- Press the button of the programmed device (TV, DVD, etc.).
2.- To know the first digit, press SET and then press number 1 key.
Count the red blinks on the indicating LED. If there are no blinks, the
digit is "0".
ENGLISH-06