Operating; Start The Application - Siemens S7-1200 Manual

5 Operating

Operating
5
5.1

Start the application

The application will be operated by simply toggle the "enable" input parameter of
the LCCF_EnetScanner function block to "TRUE" and monitor the exchanged data.
For this follow the below instructions as a watch table has been prepared in the
application examples TIA Portal project.
Table 5-1:
Ste
p
Open the prepared watch table "Watch
1.
EnetScanner"
2. Switch the watch table online to be able
to monitor and modify values
Modify the "enable" variable to "TRUE"
3.
This can be done either by
typing the value "1" or "TRUE" into the
"Modify value" column
or by using the context menu
EtherNet/IP Scanner
Entry-ID: 109782314, V1.1.0,
Instruction
04/2021
Result
The watch table opens
The watch table switches online. This is
indicated with an orange title bar.
as a result, the LCCF_EnetScanner
establishes connections to the
configured adapters and starts the data
exchange.
The status of the LCCF_EnetScanner is
reported as 16#7002, which means
busy. The appropriate flags are set as
well accordingly.
29