General Description; How To Use The Appliance - Nevir NVR-9814 T Quick Start Manual

INSTRUCTIONS FOR USE

1. General description

1. Carriage lever
Pushdown to start working
2. Stop button
Push to cancel heating
3. Defrozen button
4. Reheat button
5. Timer set browning control
Bigger number for darker browning
6. Reheat Indicator
7. Defrozen Indicator
8. Power ON/OFF
9. Crumb Tray
2. Selecting the browning level

3. How to use the appliance

Set the control knob to the suitable position, put the bread slice into the toast slots (the thickness of the
bread slice cannot be 15mm less than the width of the slot, otherwise, the slice cannot get stuck.) and
press down the lever, then the toaster begins to toast. As soon as the toasting cycle is completed (that is,
the bread has been exactly browned as preset.), the slices of bread will automatically be ejected.
Suggestion:
Before first use it is suggested having the appliance without bread operated with the control knob set to
grade 3 and the lever in down position to remove the heating element protection finish. At this time, the
appliance will smoke. This is normal. It is recommended to have a good ventilation of air. After the first
heating, let it cool down naturally before being used again.
Cleaning
Before cleaning, switch off and unplug the appliance and have it cool down.

Remove the crumbs from the browning slots and grids with the appliance not tilted. Then, open the door,

clean away the crumbs and put the door back to the appliance.
Clean away crumbs from toaster.

Remove the crumbs from the browning slots and grids with the appliance not tilted. Then, slide out the

tray, clean it and put it again into the appliance.
Outside cleaning:
Clean the outside of the appliance gently with a damp and soft cloth, and then wipe it with a dry cloth. Never
use steel wire, abrasive cloth or other caustic cleaning agents, as they will damage the finish of the appliance.
Grades
1-3
3-5
5-6
Bread type
Thin bread slice
General bread
Frozen bread