Coby MP-C848 Supplementary Manual

Common troubleshooting issues

Hide thumbs Also See for MP-C848:

COMMON TROUBLESHOOTING ISSUES

ISSUE #1 HOW DO I CONNECT MY MP3 PLAYER INTO THE

COMPUTER & TRANSFER FILES

To connect your mp3 player:

1) Go to your start menu and select "MY COMPUTER".

2) Connect the MP3 player into the computer.

3) You will notice that a "Removable Disk" will appear under MY

COMPUTER. That is the MP3 player (see picture)

4) Drag and drop or copy and paste your files into the REMOVABLE DISK.

ISSUE # 2 WHY DOES MY MP3 PLAYER READS "NO FILE"

If your MP3 player reads no file after you have transferred files into the unit

then it simply means you have transferred an invalid file format into the unit.

Make sure the files are MP3 or WMA non-copyright protected and it is not in

any "FOLDER".

ISSUE

# 3 WHY DOES MY MP3 PLAYER READS "SYSTEM ERROR"

If your MP3 player reads system error, it means the firmware is corrupted. You

will need to reset the firmware on the unit. (See issue# 10).

COBY MPC-848

Table of Contents

Do you have a question about the MP-C848 and is the answer not in the manual?

Page 1 ISSUE # 2 WHY DOES MY MP3 PLAYER READS “NO FILE” If your MP3 player reads no file after you have transferred files into the unit then it simply means you have transferred an invalid file format into the unit.
Page 2 Rights Management). The WMA file is a protected file and cannot be played on the MP3 player. You will need to remove the DRM prior to transferring the file into the MP3 player. If you are using Windows Media Player, go to the “HELP” section and read up on “Rip Setting”.