Advertisement
Solar Dock Dots – (1-3/8")
MODEL: LL-SDD-DOT
Installing Batteries
1. Remove Back Cover with Screwdriver
2. Remove Plastic Isolation Tab
3. Install Battery in correct position
4. Install Silicon Pad over battery
5. Install plastic cover with screw driver
6. Turn Tightly to make a good seal
(Replace with 1.2v NiCd or NiMh type Rechargeable Batteries ONLY)
Mounting to Surface
1. Mark Desired locations for mounting solar lights
2. Use 1-3/8" (35mm) diameter saw to make hole
3. Install lights into hole
4. If necessary you may use a silicone based glue to
secure light into place
Storage Tips (Harsh Winters)
Extreme winter weather can reduce the life expectancy of your Solar Dock Dot
1.
Extreme Cold weather can dramatically reduce the life expectancy of your rechargeable Ni-Cd or Ni-Mh battery.
2.
Store your Solar Dock Dot Lite inside during cold months when your dock is not in use.
CAUTION: CONTAINS NICKEL-CADMIUM BATTERIES. BATTERY MUST BE RECYCLED OR DISPOSED OF PROPERLY.
Lake Lite Inc.
PO Box 414
LaOtto, IN 46763
Bottom View
Battery
Tools Required
Phone: 260-918-2758
Fax:
260-918-3540
E-mail sales@lakelite.com
Silicon Pad
Cover
1-3/8"
www.lakelite.com
Advertisement
