Advertisement
Operating Instructions and Parts Manual
Please read and save these instructions. Read through this owner's manual carefully before using product. Protect yourself and
others by observing all safety information, warnings, and cautions. Failure to comply with instructions could result in personal
injury and/or damage to product or property. Please retain instructions for future reference.
FOR CUSTOMER SERVICE
Technical Question?
CALL 1-866-458-2472
customerservice@oem-tools.com
UNPACKING
After unpacking the unit, inspect carefully for any
damage that may have occurred during transit. Check
for loose, missing, or damaged parts. If any damage is
observed, a shipping damage claim must be filed with
the carrier. DO NOT use the OEMTOOLS™ 3 Speed
Evaporative Cooler if broken, bent, cracked or damaged
parts (including labels) are noted. Any Evaporative
Cooler that appears damaged in any way, operates
abnormally or is missing parts should be removed from
service immediately. If you suspect that the Evaporative
Cooler was subjected to shock load (a load that was
dropped suddenly, unexpectedly, etc.), immediately
discontinue use until it has been checked by a factory
authorized service center.
WARNING
The following safety information is provided as a guideline to help you operate your Evaporative Cooler under the
safest possible conditions. Any tool or piece of equipment can be potentially dangerous to use when safety or safe
handling instructions are not known or not followed. The following safety instructions are to provide the user with the
information necessary for safe use and operation. Please read and retain these instructions for the continued safe use
of your Evaporative Cooler. Failure to follow instructions listed below may result in serious injury. In addition, make sure
that anyone who uses the equipment understands and follows these safety instructions as well.
Explanation of Safety Signal Words
WARNING: Indicates a potentially hazardous situation which, if not avoided, could result in death or serious injury.
CAUTION: Indicates a potentially hazardous situation which, if not avoided, may result in minor or moderate injury.
CAUTION: Used without the safety alert symbol indicates a potentially hazardous situation which, if not avoided, may
result in property damage.
NOTES: Provide clarity and helpful information.
Thank you very much for choosing an OEMTOOLS
For future reference, please register your new tool at www.oem-tools.com and complete the owner's record below:
Model: _______________ Purchase Date: ___________
Save the receipt, warranty and these instructions. It is important that you read the entire manual to become familiar
with this product before you begin using it. This product is designed for certain applications only. OEMTOOLS™
cannot be responsible for issues arising from modification. We strongly recommend that this product is not modified
and/or used for any application other than that for which it was designed. If you have any questions relative to a
particular application, DO NOT use the product until you have first contacted customer service to determine if it can or
should be performed on the product.
WARNING:
This product can expose you to chemicals, including DEHP and lead, which are known to the State of
California to cause cancer and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.
12/18
2018 OEMTOOLS
™
3 SPEED EVAPORATIVE COOLER
3,100 CFM 3 Speed
Evaporative Cooler
23976
Product!
™
1
23976/23977
5,300 CFM 3 Speed
Evaporative Cooler
23977
Advertisement
Table of Contents
Summary of Contents for Oemtools 23976
- Page 1 Save the receipt, warranty and these instructions. It is important that you read the entire manual to become familiar with this product before you begin using it. This product is designed for certain applications only. OEMTOOLS™ cannot be responsible for issues arising from modification. We strongly recommend that this product is not modified and/or used for any application other than that for which it was designed.
-
Page 2: Important Safety Instructions
DISPOSAL are NOT safety glasses. Dust mask, non-skid safety shoes, hard hat or hearing protection should be used in At the end of the useful life of the OEMTOOLS™ 3 Speed appropriate conditions. Evaporative Cooler, dispose of the components according to all state, federal and local regulations. - Page 3 Operating Instructions and Parts Manual 23976/23977 3 SPEED EVAPORATIVE COOLER SAFETY INFORMATION 17. To reduce the risk of fire or electrical shock, DO NOT expose electrical connections to water. READ AND SAVE THESE INSTRUCTIONS 18. DO NOT touch electrically live components.
- Page 4 Operating Instructions and Parts Manual 23976/23977 3 SPEED EVAPORATIVE COOLER 5. Prior to putting your cooler away for winter, always: USING THE ROTARY MECHANICAL CONTROL SWITCHES (CLOCKWISE FROM OFF): a. Drain the tank and wipe it clean. Rotary Switch #1: Controls pump function b.
- Page 5 New have to be removed to adjust the float (if the water level is OEMTOOLS™ media can be purchased where you too high or too low) or remove and replace a float that has bought the cooler.
-
Page 6: Parts Diagram
Operating Instructions and Parts Manual 23976/23977 3 SPEED EVAPORATIVE COOLER PARTS DIAGRAM PARTS LIST No. Part Name 23976 Part # 23977 Part # Pump 6036050 6060050 Motor 6037051 6061051 Rigid Media Set CP370 CP610 Control Board 6037069 6037069 Casters 6036061... - Page 7 Operating Instructions and Parts Manual 23976/23977 3 SPEED EVAPORATIVE COOLER Problem Cause/Remedy 1.1 Check that the unit is plugged in properly. 1. Cooler fails to work at all 1.2 Check the POWER switch, push it to “ON”. 1.3 The TIMER switch is “OFF”, turn it to “ON”.
- Page 8 For one year from the original purchase date of this product, OEMTOOLS™ will warranty the product to be free from defects in material or workmanship. If component and or components are found to be defective within this period, OEMTOOLS will replace the defective component and or components free of charge.
Need help?
Do you have a question about the 23976 and is the answer not in the manual?
Questions and answers