Download Print this page

Lemmer TD-10 Owner's Manual

Transfer pump

Download this manual

TD-10 Transfer Pump

Specifications

Maximum Output: ............ 10.0 Litre/Minute

Ratio ................................. 1:1

Air pressure required: ...... 5 to 75 psi

Maximum Fluid pressure: 75 psi

Body: ................................ Aluminum

Diaphragm: ...................... Teflon

Acceptable fluid temp ...... 10C to 80C

Fluid inlet: ........................ 3/8" nps - F

Fluid outlet: ...................... 3/8" nps - M

Air inlet: ............................ 1/4" npt - M

Weight: ............................. 16 lbs/ 8 Kg

Required air: .................... 3 - 10 cfm

Wetted parts: ................... Al,SS,Nyl,Tef,Fe. Brass

WARNING..Read all instructions carefully before assembling components and operating sprayer.

Incorrect procedure could result in damage to the unit, severe personal injury and/or property

damage. When spraying flammable materials, sprayer must be placed at least 20 feet from target in a

well-ventilated area. Vapours can be ignited by static discharge or electrical sparks and result in

severe personal injury. Improper use could result in an injection injury.

OWNER'S MANUAL

CALGARY • TORONTO • MONTRÉAL

Need help?

Do you have a question about the TD-10 and is the answer not in the manual?

Page 1 TD-10 Transfer Pump OWNER'S MANUAL Specifications Maximum Output: .... 10.0 Litre/Minute Ratio ......... 1:1 Air pressure required: ..5 to 75 psi Maximum Fluid pressure: 75 psi Body: ........ Aluminum Diaphragm: ...... Teflon Acceptable fluid temp ..10C to 80C Fluid inlet: ......
Page 2 MPORTANT We appreciate your decision to purchase a To ensure your transfer pump reaches you in first Lemmer professional pump system. If class condition, protective flush solvents have maintained as outlined in this manual, you been used. Flush thoroughly with compatible will have many years of dependable service.
Page 3 The air motor of this pump is lubricated at the factory and requires no additional maintenance in The Lemmer transfer pump comes with normal use. An in-line oiler may be added for many shut off valves for full control in most extra protection in heavy industrial applications applications.
Page 4 ASSEMBLY SPRAY SYSTEMS 4624 - 12th Street NE Calgary, Alberta, Canada. T2E 4R4 Tel: (403)250-7735 • Fax: (403)291-9095 www.lemmer.com Manual pn# L014-670. Copyright May-05-2011...