Advertisement
Quick Links
Instruction manual
Go-kart for Hoverboard
–
61214
61217
Illustration similar, may vary depending on model
Please read and follow the operating instructions and safety information prior to initial operation.
Technical changes reserved!
Illustrations, functional steps and technical data may deviate insignificantly due to continuous further
developments.
Advertisement
Summary of Contents for WilTec 61214
- Page 1 Instruction manual Go-kart for Hoverboard – 61214 61217 Illustration similar, may vary depending on model Please read and follow the operating instructions and safety information prior to initial operation. Technical changes reserved! Illustrations, functional steps and technical data may deviate insignificantly due to continuous further...
- Page 2 The information contained in this document may alter at any time without prior notice. No part of this document may be copied or otherwise duplicated without prior written consent. All rights reserved. WilTec Wildanger Technik GmbH cannot be held liable for any possible mistakes in this operating man- ual, nor in the diagrams and illustrations shown.
- Page 3 • Make sure that you do not use the go-kart on slippery or wet surfaces. It should not be used on snowy or icy surfaces either. © by WilTec Wildanger Technik GmbH Item 61214–61217 Page 3 http://www.WilTec.de http://www.aoyue.eu...
- Page 4 (3). Use the Allen key (8) to tighten the bolts and the spanner (5) for the nuts. 3. To fix the control levers, please use the locking screws (4) and the spanner (7). © by WilTec Wildanger Technik GmbH Item 61214–61217 Page 4 http://www.WilTec.de...
- Page 5 Use the spanner (5) for this. Now fix the board with the supplied fabric straps with Velcro. Make sure that the go-kart is held firmly in place. Only use the kart with your board if it can be mounted appropriately. © by WilTec Wildanger Technik GmbH Item 61214–61217 Page 5 http://www.WilTec.de...
- Page 6 Make sure that all brackets and attachments are in perfect condition. Do not use the scooter if it is defective. Only use suitable spare parts. Contact the manufacturer or your salesperson for the appro- priate information. © by WilTec Wildanger Technik GmbH Item 61214–61217 Page 6 http://www.WilTec.de...
- Page 7 Store the go kart in a dry place. Important Note: Reproduction and any commercial use (of parts) of this operating manual, requires a written permission of WilTec Wildanger Technik GmbH. © by WilTec Wildanger Technik GmbH Item 61214–61217 Page 7 http://www.WilTec.de http://www.aoyue.eu...