Advertisement
IMPORTANT
Please always observe the Road Traffic Licensing Regulations of your country and all other valid legal
regulations and requirements. A self-balancing, electric seat scooter does NOT have a
General Operating Permit (ABE in Germany). This means that it must not be used on
public roads.
Use is recommended for children from 6 years up to a weight of
120 kg. Never leave the child unattended and only use the go kart on
a locked private property.
Respect the maximum recommended speed of 10 km/h.
Parts list
№
Name
1
Washers (4×)
2
Screw M8×20 mm (4×)
3
Flange nut M8 (4×)
4
Locking screw (2×)
5
Spanner (1×)
Assembly
To assemble the go-kart correctly, please proceed as follows:
1. Open the packaging, remove all parts and check for completeness.
2. Place the seat on the frame and fix it with the four M8×20 mm screws (2) and the matching M8
flange nuts (3). Use the Allen key (8) to tighten the bolts and the spanner (5) for the nuts.
3. To fix the control levers, please use the locking screws (4) and the spanner (7).
© by WilTec Wildanger Technik GmbH
http://www.WilTec.de
http://www.aoyue.eu
http://www.teichtip.de
№
Name
6
Quick clamp/knob (1×)
7
Spanner (1×)
8
Allen key (1×)
Without illustration: lashing straps (2×)
Item 61214–61217
Page 4
06
2021-1
Advertisement
