eurodib LM Series Instruction Manual

eurodib LM Series Instruction Manual

Spiral mixers

Advertisement

ATTENTION
 New use or repair of this product must be performed by experts or by a qualified person or those who have gotten the
licence of installation, or those who are authorized by the manufacturer.
 When performing installation or maintenance, please obey the following instructions carefully to ensure the safe use
of this appliance.
 Please keep this instruction manual for future reference, or hand it to next user.
 Put off the package to make sure none of the parts is missing or damaged. If there is any doubt about the product,
please do not use it. Consult experts.
 Keep packaging material out of reach of the children to avoid accident (especially the plastic bag, screws, etc.)
 This appliance could be only operated by the person who is familiar with the unit.
 When not using the appliance or if the operator is absent, please turn off unit to avoid any accidental injury or
damage.
 When it needs to be repaired, please ask expert and use original spare parts. It will be dangerous if you are not
following the above requirements.
 This appliance is just for commercial use, not for any other use. Otherwise, it may be dangerous.
 Do not rinse the equipment with water directly.
 Clean stainless steel surfaces periodically with appropriate method to prevent any damage brought by oxidization or
any other chemical interference.
1.DESCRIPTION
The LM spiral mixer is a new type of kneader. Both the dough arm and bowl are running, which raises the mixing speed
and efficiency greatly. The machine is equipped with a protection cover that is easy to operate and safe. Overall, the
machine is good looking, easily operable and very efficient, suitable for food preparation in hotels, restaurants, food
processing factories and for material preparation in medicine making factories, chemical working facilities, etc.
2. FOREWORD
We reserve the right to alter the design of this product without prior notice, while every effort is made to ensure this
publication reflects the latest design.
LM Series Spiral Mixers
1

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the LM Series and is the answer not in the manual?

Questions and answers

Summary of Contents for eurodib LM Series

  • Page 1 LM Series Spiral Mixers ATTENTION  New use or repair of this product must be performed by experts or by a qualified person or those who have gotten the licence of installation, or those who are authorized by the manufacturer.
  • Page 2 Technical specifications Model Bowl capacity Max flour capacity Mixing speed Bowl speed Voltage Power Dimensions Weight (V/Hz) (kg) (r/min) (r/min) (kw) (mm) (kg) LM20 110/60 0.75 690x380x730 LM30 220/ 60 730x430x770 LM40 220/60 870x480x935 LM50 220/60 920x530x935...
  • Page 3: General Information

    3.GENERAL INFORMATION The following instructions may not cover all details or variations of the equipment, nor cover every problem that one may encounter during installation or use. If additional information is required, please contact Eurodib. 4. SAFETY INFORMATION The following procedures and instructions should always be carried out in order to prevent injuries. If the machine is not used as recommended, the operator will be responsible for his own safety and for the safety of other persons who may be involved.
  • Page 4: Safety Instructions

    4.2. SAFETY INSTRUCTIONS A FULLY TRAINED AND COMPETENT PERSON MUST ONLY USE THE ATTACHMENT AND/OR MIXER. When manoeuvring or lifting a bowl and its contents with a total weight in excess of 500 kg, a bowl truck must be used. As far as reasonably possible, avoid tasks concerned with manual handling that involves a risk to health.
  • Page 5: Maintenance

    5.Operation and Notes: • Place the machine on the horizontal floor, keep it stable, and maintain the environment in a suitable temperature. • Check whether the power supply corresponds to what the machine requires, and whether wires are connected properly. Warning: The machine must be grounded properly (the user’s power supply must come with a ground wire).
  • Page 6: Troubleshooting

    B. Do not start the machine repeatedly to prolong the machine’s life time. The continuous running time should not be too long. C. Lubricate chains and main moving parts about once a mouth. D. Check belt and chain tension about once every six months. E.
  • Page 7: Electrical Installation

    7.2. LOCATION The mixer is not suitable for outdoor installation and must not be installed where a water jet could be used for cleaning. The mixer must only be operated by trained staff and must be installed in an area where the use and maintenance are restricted to trained personnel.
  • Page 8 LM20, LM30, LM40, LM50 Circuits (Single Phase) Code Name Qty. Motor Contactor Emergency Stop button Start Button with light Journey Switch Timer...
  • Page 9 LM30A, LM40A, LM50A Circuits (Three Phase) Code Name Qty. Motor Contactor Emergency stop button Start button with light Journey switch Omnipotent change switch...
  • Page 10 8. MACHINE ILLUSTRATION: If you want to replace parts, you can give us the list of required parts by referring to the parts list below. LM20, LM30, LM30A Part No. Name of part Qty. Part No. Name of part Qty. LM20 30 -13 Protective casing LM20 30 -35...
  • Page 11 GB1243.1-83 Chain LM20 30 -07 Bottom plate LM20 30 -41 Chain pulley Z=18 LM20 30 -12 Guiding wheel LM20 30 -32 Belt pulley seat Rubber foot LM20 30 -38 Big belt pulley LM20 30 -31 Small pulley Z=20 GB278-82 Bearing 80204...
  • Page 12 LM40, LM50, LM40A, LM50A...
  • Page 13: Cleaning Instructions

    - Use approved sanitizers. Follow manufacturer’s instructions exactly, be sure to wipe entire machine. 5. Air dry. ********DO NOT********** -Use any types of bleach (hypo sodium chloride) -Fill with water/ hose down -Use steel wool/scrubber pads or anything abrasive. SERVICE AND WARRANTY: Please contact Eurodib: service@eurodib.com or 1-888-956-6866...

This manual is also suitable for:

Lm20Lm30Lm30aLm40Lm50Lm50a

Table of Contents