Advertisement
7. DECLARATION OF CONFORMITY
Declaration of Conformity:
BEAM CLAMPS
MODEL No's: BC1000.V2, BC2000.
V2, BC3000.V2, BC5000.V2
2006/42/EC Machinery Directive
93/68/EEC CE Marking Directive
Health & Safety at Work Act 1974
Lifting Operations & Lifting Equipment Regulations (LOLER) 1998
EN292-2 1991
Your clamp is guaranteed for one year from the date of purchase. The Guarantee does not cover faults caused by incorrect use, lack of
maintenance, accidental damage or damage caused to third parties through misuse. You are recommended to inform your insurers and check
that adequate cover is in place. Warranty claims must be supported by a copy of the dated purchase receipt.
NOTe: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior notice.
IMPORTANT: No liability is accepted for incorrect use of product.
WARRANTY: Guarantee is 12 months from purchase date, proof of which will be required for any claim.
INFORMATION: For a copy of our latest catalogue and promotions call us on 01284 757525 and leave your full name and address, including postcode.
Signed by Mark Sweetman
For Jack Sealey Ltd. Sole importer into the UK of Sealey Power Products.
Sole UK Distributor
Sealey Group,
Bury St. Edmunds, Suffolk.
PAGE 3
We, the sole importer into the UK, declare that the products listed
below is in conformity with the following standards and directives.
The construction file for these products are held by the
Manufacturer and may be inspected, by a national authority,
upon request to Jack Sealey Ltd.
01284 757500
W e b
01284 703534
email
BC1000.V2, BC2000.V2, BC3000.V2, BC5000.V2 Issue: 1 - 24/04/09
24th April 2009
www.sealey.co.uk
sales@sealey.co.uk
Advertisement
