Download Print this page

Concept Smoke Screen Rapid Deploy End User Manual

Download this manual

Using a Smoke Screen Deploy

End user guide

(12 April 2020)

Need help?

Do you have a question about the Rapid Deploy and is the answer not in the manual?

Page 1 Using a Smoke Screen Deploy End user guide (12 April 2020)
Page 2 Smoke Screen. If you have any questions that remain unanswered, please call our experts at Concept Smoke Screen and we will help. Once again, thank you for your decision; we hope that it’s one that never needs to be tested.
Page 3 CONTENTS...
Page 4 HOW DOES YOUR SMOKE SCREEN WORK? Your Smoke Screen passes a non-toxic fluid through an efficient heat exchanger to create smoke, or more accurately a thermally generated fog that obscures visibility, discouraging intruders from entering your premises. This fog is very persistent and will stay suspended in the room for a significant length of time until it is vented by opening the doors and windows.
Page 5: Operation
OPERATION Preparing the Smoke Screen 1. Plug the Smoke Screen into a suitable socket and wait for 20 minutes for the machine to heat up to temperature. The “Status” LED will light up GREEN when the Smoke Screen is ready. 2.
Page 6 CHECKING & CHANGING THE FLUID Checking the fluid The Smoke Screen has a replaceable 1 litre Swift-Fit fluid bottle that is accessed by removing the cover on the right-hand side of the machine. The fluid level is monitored using sensors in the fluid reservoir to give the following indications on the “Status”...
Page 7: Status Indications
STATUS INDICATIONS SERVICING & FLUID REPLENISHMENT • • •...
Page 8 Concept Smoke Screen Limited...