Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Summary of Contents for Radius RadPoint
- Page 1 RadPoint Reader Installation Guide RNU-C01-GUIDE...
- Page 2 Table of Contents Overview Equipment Technical Specifications System Environmental Physical Accessories Hardware Installation Software Installation Configuration Operation Certification European Conformity FCC Grant OEM Installation Contact...
- Page 3 Overview The RNU-C01 RadPoint Reader is high performance fully NFC compliant card reader that enables a connected host computer to read loyalty (VAS) data from Type 2 and Type 4 NFC Tags, Apple Wallet cards, and Google Pay cards. Equipment Included in the received equipment you should find the following 1.
- Page 4 Hardware Installation Connect the RNU-C01 RadPoint Reader to a host computer using the supplied USB-A to USB-C cable. The reader should be enumerated as a USB CDC/ACM device on your computer. Software Installation The RadPoint Reader Utility can be used to configure and validate the operation of your RadPoint Reader.
- Page 5 4. Google Wallet Collector ID: A variable byte length identifier for Google Wallet items of interest. Operation You can validate operation of your RadPoint Reader by tapping the reader an NFC card (DESFire or Ultralight-C) or a valid iOS or Android device that has been loaded with a matching Wallet item. You should see the results of the NFC read event the read section of the utility window.
- Page 6 Contains FCC ID: 2AA9B10 OEM Installation The RNU-C01 RadPoint Reader can be reused as a module for integration into end devices following the instructions/restrictions below: ● Changes or modifications to this device, not expressly approved by Radius Networks, Inc. could void authority to operate this device under FCC regulations.
Need help?
Do you have a question about the RadPoint and is the answer not in the manual?
Questions and answers