Related Manuals for Aura WaterFall Series
Summary of Contents for Aura WaterFall Series
- Page 1 WaterFall WaterFall C l e a n i n g S y s t e m C l e a n i n g S y s t e m User Manual TechnoVac StillVac Model Model Model 114HW 114RW 114IW...
- Page 2 Dear Customer, Thank you for choosing our product. We hope that Aura Vacuum Cleaner and Shampooers, which have been manufactured in modern facilities and under high-quality standards, will provide the best solution for your needs. Please read the entire user manual thoroughly and keep it for future...
- Page 3 • Before operating the device, be sure to check the device or power cord for damage. If there is any damage, do not operate your device and contact your nearest Aura Authorized Service. • Do not leave the device plugged in when it is not in use. Turn off your device before unplugging.
- Page 4 Accessories Vacuuming Partst Filter Cover Suction Group Sponge Filter Filter Slot Suction Hose Telescopic Tube Daily Cleaning Elliptical Brush Nozzle Crevive Tool Air Outlet Filter Shampooer Parts (114HW, 114RW) Fresh Water Tank Hard Floor Carpet Washing Upholstery Rubber Nozzle Washing Nozzle Hose Clamp Washing Set Tube...
- Page 5 • Make sure that the plastic suction piece is correctly attached to the lower body before you start using the cleaner. (Picture 2) • Place the sponge filter (Picture 3) first, and then the filter holder (Picture 4) on the upper body of the device. Then turn the filter cover half a turn clockwise to lock it.
- Page 6 • Attach cleaning water spray trigger to the handle by pressing it. (Picture 12) • Insert the long end of the water pipe into the check valve connection on front of the machine (Picture 13) and the other end into the sprayer on the washing nozzle.
- Page 7 Picture 19 Picture 16 Washing process warnings and precautions • We strongly recommend that you use Aura carpet washing shampoo in your product. You can obtain Aura carpet washing shampoo from authorized services. • Other shampoos, cleaning chemicals, foaming liquid or powder detergents may damage your device.
- Page 8 • Unclip and remove the motor unit. Tilt the unit 90 degrees as shown in (Picture 20), drain the remaining water into the reservoir. Emty dirty water, rinse the reservoir thoroughly, wipe with a cloth and allow to dry completely before storage. •...
Need help?
Do you have a question about the WaterFall Series and is the answer not in the manual?
Questions and answers