Advertisement
Table of Contents
INSTALLATION
1.CHARGE LED (RED)
Indicates that the built-in battery is being charged.
2.POWER JACK (DC 5V)
Plug the supplied DC 5V 700mA adapter.
3.POWER ON LED (GREEN)
Indicates that the power is ON or OFF.
4.ANTENNA
Sends audio and video signals.
5.POWER OFF
When the switch is at this position, the power is off.
6-9. SEL (CHANNEL SELECTION) KNOB
Must select the same channel on both transmitter and
receiver.
10.IR LED
Automatically turns on at night to view objects in darkness.
11.MOUNTING BRACKET
Install the mounting bracket where you want to.
12. ANTENNA
Sends audio and video signals.
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Summary of Contents for Clover TFT2500RX
- Page 1 INSTALLATION 1.CHARGE LED (RED) Indicates that the built-in battery is being charged. 2.POWER JACK (DC 5V) Plug the supplied DC 5V 700mA adapter. 3.POWER ON LED (GREEN) Indicates that the power is ON or OFF. 4.ANTENNA Sends audio and video signals. 5.POWER OFF When the switch is at this position, the power is off.
- Page 2 5.VIDEO OUTPUT Connect the supplied cable to the video output jack on the receiver and the other end to TV’ s or monitor’s video input to get more clear pictures. 6.SPEAKER Listen to sound from the wireless cameras.
- Page 3 WIRELESS RECEIVER---TFT2500RX Connect the supplied AC adaptor (DC 9V 1.5A) to the DC IN jack of the receiver and plug it into AC outlet. The receiver can also be powered on by four dry batteries (AAA: not supplied). Press the channel selection button to select the same channel as the camera.
Need help?
Do you have a question about the TFT2500RX and is the answer not in the manual?
Questions and answers