Clover Z670 Instruction Manual page 6

Click the "PAN/TILT (PELCO D)" button on the channel you wish to install the
▪
zoom camera and then the PAN/TILT Menu will be displayed as shown in Fig.4-5.
Settings in the PAN/TILT Menu
▪
(Refer to System manual section 7-4.5 on page 90 for more detail)
- Click the PTZ ID button in the PAN/TILT Menu shown in Fig.4-5, then the On
Screen Keyboard will show up.
- Delete the current PTZ ID with the
Screen Keyboard, and then click "OK" button to set with the new ID. The ID
should be the same ID as the zoom camera has (e.g.: If the ID of the zoom camera
is set to 7, the PTZ ID in the PAN/TILT Menu as shown in Fig.4-5 should be
entered 7).
[Fig.4-4 Camera Menu]
[Fig.4-5 PAN/TILT Menu]
button and enter a new ID by using On