Go Power GP-DURALITE-100-E Quick Start Manual

Panel Speci cations
SPECIFICATIONS
Solar Cell Type Monocrystalline
Output Power 100W
Rated Current 5.06A
Open Circuit Voltage 23.3V
Short Circuit Voltage 5.45A
Dimensions (closed)
21.1 x 23.6 x 1in; 535 x 600 x 25 mm
21.1 x 47.2 x 1.0 in; 535 x 1200 x 25 mm
Dimensions (open)
8.4 lbs; 3.8 kg
Weight
2 year - panel
Warranty

Warnings

This kit IS NOT
Never leave your Duralite Solar Kit unattended, plugged in
weatherproof
overnight, or subject to inclement weather.
Disconnect all power Electricity can be very dangerous. Take appropriate caution when
sources making connections.
Observe all safety precautions of the battery manufacturer when
handling or working around batteries. When charging, batteries
Battery and wiring safety
produce hydrogen gas, which is highly explosive. Ensure batteries
are in a well-ventilated space, away from sparks for open flames.
Ensure all connections are tight and secure. Loose connections
may generate sparks and heat. Be sure to check all connections
Wiring connections
before using the portable solar kit.
Reverse polarity of the battery terminals and array will cause the
controller to give a warning tone. The controller will not function
Observe correct polarity
unless battery terminals are connected to a battery with proper
polarity. Failure to correct this fault could damage the controller.
Do not exceed the Charge
Controller current and
Refer to manual for details.
voltage ratings
1
4
3

Included in kit:

• 100 watt Kit
• Expansion Harnesses:
8mm Barrel Connector Harness
•
• MC4 Connector Harness
No. Description
1 Cloth Backing
2 Wiring Connector
Find tech tips, manuals and support at gpelectric.com
GP-DURALITE-100-E
Portable Solar Kit
Quick Start Guide
The Expansion kit is highly
recommended to be used
with the Go Power!
Portable Power Pack.
No. Description
3 Easy Fold Legs
4 Carrying Handles
2