Advertisement
INSTALLATION INSTRUCTION
Important Instructions. Please read first
•
Please follow instructions carefully. Failure to do so will void the
local law and applicable standards.
1.
Ensure correct input v oltage is supplied to the luminaire.
2.
Ensure the power is disconnected before making any connections.
3.
Do not make modification nor alter the luminaire without written approv al from GLP.
4. Ensure to keep luminaire in a clean area free of debris.
INSTALLATION
•
Step 1:
Find a location where the luminaire has to be installed. Install a suitable wiring from the main supply
(110 - 260VAC 50/60Hz) to the luminaire.
•
Step 2:
Remov e the mounting bracket from the luminaire.
•
Step 3:
Pull out input (110-260VAC 50/60Hz ) cable from the wall where luminaire has to be installed . Install
mounting bracket using fischer and stainless steel screws as illustrated.
www.globallightllc.com
.
info@globallightllc.com
warranty.
Please ensure installation complies with
Tel: +971 4 340 44 58
WL220149
Fax: +971 4 341 10 90
Advertisement
Table of Contents
Summary of Contents for Global Light & Power LCC WL220149
- Page 1 INSTALLATION INSTRUCTION WL220149 Important Instructions. Please read first • Please follow instructions carefully. Failure to do so will void the warranty. Please ensure installation complies with local law and applicable standards. Ensure correct input v oltage is supplied to the luminaire.
- Page 2 • Step 4: Connect the luminaire to power supply using terminals and wrap the connection using 3M tape and electrical tape. • Step 5: Mount the luminaire on the bracket using screws. www.globallightllc.com info@globallightllc.com Tel: +971 4 340 44 58 Fax: +971 4 341 10 90...
Need help?
Do you have a question about the WL220149 and is the answer not in the manual?
Questions and answers