Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for az-instrument 8878
Summary of Contents for az-instrument 8878
- Page 1 OPERATION MANUAL STICK INFRARED THERMOMETER Model: 8878 8879...
- Page 2 Congratulations on your purchase of the Infrared Thermometer. The compact size lets you get into tight places while its convenient laser targeting and high distance to-spot ratio gives you accurate readings on distant targets. Precise non-contact Measurements Switchable C/ F Temperature units Automatic Data Hold D 70 100 mm...
-
Page 3: Front Panel Description
The meter is pre-set to measure objects with an emissivity of 0.95. This will accommodate the majority of items measured without compensating for higher or lower value. In most cases there will be little difference in measurements , even if an object's emissivity is higher or lower than this pre-set value. -
Page 4: Laser Safety
LASER SAFETY (Model 8879) Do not point the laser toward the eyes or face of a person or animal. Laser light can cause eye injury, if the beam makes direct eye contact. Reflected Laser light can also cause damage, if a mirror or a glass-like surface reflects the beam directly into the eye. -
Page 5: General Specifications
Keep this device away from children, except under direct adult supervision. To toggle the laser targeting feature on, or off depress the button. The laser remainson for approximately 1/2 second after the laser button is released. GENERAL SPECIFICATIONS LCD display Display -4 C to 600 F (-20 Measurement Ranges... -
Page 6: Power On/Off
NON-CONTACT IR MEASUREMENT OPERATION A. POWER ON/OFF The meter automatically powers when the MEAS key is pressed. Press the MEAS key to take a reading. Read the measured temperature on the LCD. The meter powers OFF automatically approximately 4 seconds after the MEAS key is released. -
Page 7: Battery Replacement
BATTERY REPLACEMENT A flashing display is the indication that the battery voltage has fallen into the critical region (6.5 to 7.5 V). Reliable readings can be obtained for several hours after the first appearance of the low battery indication. Open the Battery Compartment and remove the battery, then install a new battery and replace the cover. -
Page 8: Material Supplied
E4 . Need re-calibrate ,please return to the store or authorized lab. E6. Part damaged , return the unit to the store you purchased for repairing. MAINTENANCE CASE CLEANING : Use caution with a damp cloth to clean the exterior housing , ensure no water or soap is allowed inside the meter ,or on the infrared lens. -
Page 9: Warranty
WARRANTY The meter is warranted to be free from defects in material and workmanship for a period of one year from the date of purchase. This warranty covers normal operation and does not cover battery , misuse , abuse , alteration , tampering , neglect , improper maintenance , or damage resulting from leaking batteries. - Page 10 CE CERTIFICATION The meter conforms to the following standards: * EN 50081-1/1992 : EN 55022 * EN 50082-1/1997 : EN 55024 (EN 61000-4-2/-3/-8,ENV 50204) , the meter complies with the essential protection requirements of Council Directive 89/336/EEC on the approximation of the laws of the Member States relating to electromagnetic compatibility.
- Page 11 Accuracy, the Zenith of Measuring / Testing Instruments ! Hygrometer/Psychrometer Thermometer Anemometer Sound Level Meter Air Flow meter Infrared Thermometer K type Thermometer K.J.T. type Thermometer K.J.T.R.S.E. type Thermometer pH Meter Conductivity Meter T.D.S. Meter D.O. Meter Saccharimeter Manometer Tacho Meter Lux / Light Meter Moisture Meter Data logger...
Need help?
Do you have a question about the 8878 and is the answer not in the manual?
Questions and answers