Table of Contents
Advertisement
LW2100AP User's Manual
Version 1.4
2002.05.14
Chapter 2 WEB Server Manual
2.1 Execution of WEB Server and AP connection to WEB Server
This chapter explains how to connect the LW2100AP to the Internet using Web-based
management tool.
The first step is to execute the Internet browser directly and to enter the IP address of an AP to
connect. At this time, it is possible only if the IP address of an AP to connect is already known.
The default IP address of an AP in factory shipment is 10.0.0.1
The AP connection to WEB Server is available for a PC that can execute the Internet browser
and connect with the Internet. If the AP connection to WEB Server operates normally, a window
indicating to input the password of connected AP is open.
10.0.0.1
The default value of the username and the password is "root", "lw2100ap" respectively.
If the password is correctly entered, the initial Home screen displays as follows.
At this time, the access to WEB Server is available.
* The Web-based management system is fully compatible with Microsoft Internet Explorer
versions 4.0 or later and Netscape Communicator versions 4.0 or later. Earlier versions of these
browsers
cannot
use
all
features
of
the
management
system.
Copyright© 2002 LG Electronics Inc., LTD.
Page 14 of 46
Advertisement
Table of Contents
