Table of Contents
Advertisement
Quick Links
MPEG-2 / H.264
for up to 4 HD or SD Programs
Stock #
6567
© Blonder Tongue Labs, Inc.
All Rights Reserved. Specifications subject to change without notice. All trademarks are property of their respective owners.
HDMI IP Encoder
Model Name
Description
Clearview™ HDMI4
4 Channel HDMI Encoder Module; 1RU
ISO 9001:2015 Certified
Clearview
/ H.265
(AVC)
HDMI4
™
Quick Guide
(HEVC)
P/N: 651253200A | Rev: 042021
Advertisement
Table of Contents
Summary of Contents for Blonder tongue Clearview HDMI4
- Page 1 Description 6567 Clearview™ HDMI4 4 Channel HDMI Encoder Module; 1RU P/N: 651253200A | Rev: 042021 © Blonder Tongue Labs, Inc. ISO 9001:2015 Certified All Rights Reserved. Specifications subject to change without notice. All trademarks are property of their respective owners.
- Page 2 Product Introduction The Clearview HDMI4 can accept up to four HD or SD programs from the four HDMI input connectors located on the rear panel. The Clearview HDMI4 can encode to MPEG-2, H.264/MPEG-4 (AVC), or H.265 (HEVC) in all major resolutions from 480i through 1080p60.
- Page 3 Clearview HDMI4 Quick Guide Step 2: Connecting to a PC/Laptop ETHERNET ACCESS: Local or remote communication with the unit is only possible through a GUI-based menu via web browser (Chrome or Firefox is recommended). Before you can communicate with the unit, you must configure your computer's IP address to be in the same subnet as the units default IP address.
- Page 4 4 Clearview HDMI4 Quick Guide Step 3: Login to the Controller An Ethernet Cable should be connected between your PC and the “Control” port on the unit. Open a Web browser (Chrome or Firefox recommended) and type http://172.16.70.1 in to your web browser to view and configure your Clearview HDMI4.
- Page 5 Clearview HDMI4 Quick Guide Step 4: Basic Configuration (continued) System Page - Full View Encoder Ethernet Settings This section allows the user to individually configure the network settings for each numbered encoder (EC1 to EC4). REMINDER If the IP Address is changed, the procedure in Step 3 must be repeated using the new IP address in place of the default IP address in order to re-access the control panel.
- Page 6 6 Clearview HDMI4 Quick Guide Step 5: Encoder Configuration (continued) Encoders: Status The information shown on this screen indicates the status of each encoder. A visual status of the pipeline is also shown on the left side. When hovering over an encode block, the corresponding status table highlights.
- Page 7 Quick Guide Non-Standard Network Configuration Example network configuration: 1. The Video Source device's control port is configured to be at 192.168.3.18. 2. The Clearview HDMI4 IP Video ports are configured to be at 192.168.6.71 192.168.6.74 (EC1 at “192.168.6.71”, EC2 at “192.168.6.72”, etc.) with subnet masks of 255.255.0.0.
- Page 8 A Return Material Authorization (RMA) Number is required on all products returned to Blonder Tongue, regardless if the product is being returned for repair or credit. Before returning product, please contact the Blonder Tongue Service Department at 1-800-523-6049, Ext. 4256 or visit our website: www.blondertongue.com...
Need help?
Do you have a question about the Clearview HDMI4 and is the answer not in the manual?
Questions and answers