Do you have a question about the VS-801 and is the answer not in the manual?
Questions and answers
Summary of Contents for Pixel VS-801
Page 1
(组合式离机线) Thank you for purchasing the high-end Thank you for purchasing the high-end PIXEL product. This product is using for off- PIXEL product. This product is using for off- camera to control the flashgun. Its makes camera to control the flashgun. Its makes...
Page 2
Cautions (注意事项) Make sure the camera and flash are powered 在安装前, 请确认相机和闪光灯是处于关机 off before use. 状态。 This is an electronic products accessory; some of the environment causes may affect 本产品属电子产品的附件,有可能因外界环 the working. However this is hardly ever to 境因素影响而造成相机或闪光灯不能或异常 get this situation, don't worry! 动作,...
Page 3
Off-camera adaptor (flash side) please contact to dealer if there is missed (闪光灯连接端) some items. Hot shoe holder 热靴座 Off-camera adaptor (camera side) Trigger pins VS-801 Off-camera adaptor (flash side) 触点 Instruction manual 8pins socket Off-camera connecting cable Pins 接口...
Page 4
The name of each part (各部位名称) Off-camera adaptor (camera side) (相机连接端) for Canon for Nikon Flash control switch 闪光开关 Trigger pins A B C A B C 触点 TTL command switch TTL通信开关 8pins socket Pins 接口...
Page 5
Installation (安装连接) Install to camera side adaptor Install to camera side adaptor Install to camera side adaptor Install to camera side adaptor (安装相机连接端) (安装相机连接端) (安装相机连接端) (安装相机连接端) 1. Please make sure the camera power is 2. Insert the camera side adaptor on the off, loose the screw lock to right as figure.
Page 6
Installation (安装连接) Install to flash side adaptor Install to flash side adaptor Install to flash side adaptor Install to flash side adaptor (固定闪光灯连接端) (固定闪光灯连接端) (固定闪光灯连接端) (固定闪光灯连接端) 1. Follow the figure to install the flash side 1. Install the quick release plate on the tripod ball head.
Page 7
Installation (安装连接) Install to flash side adaptor Install to flash side adaptor Flash installation Flash installation (安装闪光灯) (安装闪光灯) (固定闪光灯连接端) (固定闪光灯连接端) Or install the flash side adaptor on the Make sure the flash power is off, and then light stand directly. insert the flash on the flash side adaptor.
Page 8
Installation (安装连接) Connecting cable and camera side Connecting cable and camera side Connecting cable and flash side adaptor Connecting cable and flash side adaptor adaptor connection adaptor connection connection connection 连接线与相机连接端的连接 连接线与相机连接端的连接 连接线与闪光灯连接端的连接 连接线与闪光灯连接端的连接 2、Connecting cable 8pins plug insert to 1.
Page 9
Usage (引闪使用) When TTL switch at A means flash A will can be worked as TTL mode; When TTL switch at B means flash B will can be worked as TTL mode; When TTL switch at C means flash C will can be worked as TTL mode.
Page 10
Usage (引闪使用) Explanation (实例): TTL command switch at flash A, its works with TTL mode; flash B and C switch to on for support flash. 当TTL通信开关拨到A时,对应的A闪光灯可以TTL引闪;B,C闪光开关打开时闪光灯将同时做辅助引闪。...
Page 11
Usage (引闪使用) Explanation (实例): TTL command switch at flash A, its works with TTL mode; flash C switch to on for support flash; flash B switch to off for stop using. 当TTL通信开关拨到A时,对应的A闪光灯可以TTL引闪;C闪光开关打开时闪光灯将同时做辅助引 闪;B闪光开关关闭,闪光灯不引闪。...
Page 12
可另购以下产品) Flash side adaptor(闪光灯端) Model Compatible with Flash model (适用的品牌相机) (型号) 适用闪光灯型号 580EX II, 580EX, 550EX, 430EX II, 430EX, VS-801 Canon 420EX, 380EX, 320EX, 270EX II, 270EX, 220EX VS-802 Nikon SB-900, SB-800, SB-700, SB-600, SB-400 for Canon for Nikon )...
Need help?
Do you have a question about the VS-801 and is the answer not in the manual?
Questions and answers