Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Summary of Contents for BE Power Equipment WHIRL-A-WAY
- Page 1 14” WHIRL-A-WAY 85.403.014 User Manual...
-
Page 3: Table Of Contents
TABLE OF CONTENTS Introduction Using the Operator’s Manual Product Identification Record Identification Numbers Pre-Operating Instructions Before You Begin Intended Use Care Operating Operating Recommended Applications Use with a Gun and Lance Attach to Long Wand Parts List Troubleshooting & Parts List Warranty Warranty... -
Page 4: Introduction
Reading the owner’s manual thoroughly will help avoid any personal injury or damage to your Whirl-A-Way. The information in this manual will offer you the most effective tools for cleaning as well as the safest. By knowing how best to operate this machine you will be better positioned to show others who may also operate the unit. -
Page 5: Product Identification
PRODUCT IDENTIFICATION Record Identification Numbers 14” Whirl-A-Way If you need to contact an Authorized Dealer or Customer Service line (1-866-850-6662) for information on servicing, always provide the product model and identification numbers. You will need to locate the model and serial number for the pump and record the information in the places provided below. -
Page 6: Pre-Operating Instructions
The surface Cleaning System you have purchased connects directly to a 1/4” quick connect coupler, operating to a maximum of 4000 PSI. This 14” Whirl-A-Way is designed to operate with cold water pressure washers. We do not recommend the use of hot water as the nylon brush skirt will soften and wear prematurely, voiding any warranty. -
Page 7: Operating
4000 PSI. This unit will not spin efficiently with pressure under 2.3 GPM. Periodically check the tips to ensure they are not plugged by dirt particles. It is very important when operating your 14” Whirl-A-Way, that you maintain a continuous motion. -
Page 8: Parts List
TROUBLESHOOTING / PARTS LIST Troubleshooting Problem Cause Solution • 1 or more plugged nozzles • Clean or replace nozzles Rotary arm not • Nozzles not aligned with arm • Realign nozzles spinning • Damaged nozzle or rotary arm • Replace damaged part(s) Leaking water •... -
Page 9: Warranty
WARRANTY Warranty This surface cleaning unit has a 1-Year warranty on all components except for the nylon brush ring. This includes the rotary head, the nylon brush ring, and plastic cover. This warranty covers manufacturer defects only and does not extend to any damage caused by the user. It also does not extend to any wear and tear caused by regular use of the product. - Page 10 POWER EQUIPMENT If you need assistance with the assembly or operation of your Whirl-A-Way please call 1-866-850-6662...
Need help?
Do you have a question about the WHIRL-A-WAY and is the answer not in the manual?
Questions and answers