Acer Chromebook Spin 11 Lifecycle Extension Manual page 17

Mainboard Removal
Prerequisite:
LCD Module Removal
WLAN (Wireless Local Area Network) Module Removal
1. Find the mainboard (D) on the top assembly. Refer to
2. Remove the adhesive tape (I) from the keyboard connector
Figure 1-17. Keyboard Connector Tape Removal
3. Disconnect the 30-pin USB board FPC from the mainboard connector (B). Refer to
Figure 1-18.
4. Disconnect the 40-pin USB board FPC from the mainboard connector (C). Refer to
Figure 1-18.
5. Disconnect the second camera module cable from the mainboard connector (E). Refer
to Figure 1-18.
6. Disconnect the keyboard FPC from the mainboard connector (A). Refer to
Figure 1-18.
7. Disconnect the touchpad FPC from the mainboard connector (F). Refer to
8. Disconnect the speaker cable from the mainboard connector (G). Refer to
Figure 1-18.
CAUTION:
!
Make sure all cables and FPCs are disconnected from the connectors on the
mainboard to avoid damage during removal.
Disassembly Procedures
and
D
II
Figure 1-8.
(Figure 1-17).
Figure
0
1-18.
1-15