Renssi RCM-10 Instructions Manual
  1. Manuals
  2. Brands
  3. Renssi Manuals
  4. Pipe cleaners
  5. RCM-10
  6. Instructions manual

Renssi RCM-10 Instructions Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
INSTRUCTIONS
RCM-10
Jobsite Health & Safety is a first priority matter here at
Renssi®. To extend this priority to our customers and end-
users, we have created this extensive Manual for you to rely on
when working with our products.
01/2018
KEEP FOR THE FUTURE USE!
WARNING!
These instructions are for your own, personal
safety. Always make sure that you have read
and understood these instructions carefully
before using Renssi® Tools.
IMPORTANT
READ BEFORE USE OF TOOL
1

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the RCM-10 and is the answer not in the manual?

Questions and answers

Summary of Contents for Renssi RCM-10

  • Page 1 INSTRUCTIONS RCM-10 Jobsite Health & Safety is a first priority matter here at Renssi®. To extend this priority to our customers and end- users, we have created this extensive Manual for you to rely on when working with our products.

  • Page 3: Table Of Contents

    2. GENERAL POWER TOOL SAFETY WARNINGS 2.1.0 Work Area Safety 2.2.0 Electrical Safety 2.3.0 Personal Safety 2.4.0 Power Tool and Use 3. OPERATING THE RCM-10 4. MAINTENANCE 5. ATTACHMENTS To watch practical demonstration videos, or to download an digital copy of this manual, please visit http://renssi.com/#safety-manuals...

  • Page 4: Introduction

    RCM-10 unit is intended to be used in cleaning sewer pipes and reinstating after relining process. Before a successful relining process, the pipe needs to be well cleaned. RCM-10 unit is designed to rotate a cable with a cleaning or cutting tool at the end of the cable.

  • Page 5: Work Area Safety

    2.1.0 WORK AREA SAFETY 1. Keep work area clean and well lit. Cluttered or dark areas invite accidents. 2. Do not operate power tools in explosive atmospheres, such as in the presence of flammable liquids, gases or dust. Power tools create sparks which may ignite the dust or fumes. 3.

  • Page 6: Personal Safety

    2.3.0 PERSONAL SAFETY 1. Stay alert, be careful and use the power tool with caution. Do not use the power tool when you are tired or under the influence of alcohol or drugs. Losing concentration for a moment can cause serious personal injury. 2.

  • Page 7: Power Tool And Use

    2.4.0 POWER TOOL AND USE 1. Do not force the power tool. Use the correct power tool for your application. The correct power tool will do the job better and safer at the rate for which it was designed. 2. Do not use the power tool if the switch does not turn it on and off. Any power tool that cannot be controlled with the switch is dangerous and must be repaired.

  • Page 8: Operating The Rcm-10

    WARNING! Improper use of the machine can cause serious damage. 1. Use the Renssi® equipment always on a solid surface to prevent equipment from falling. 2. Make sure the RCM-10 unit is unplugged before making any adjustments. 3. Choose the desired rotation direction from the drill.

  • Page 9: Maintenance

    Inspect the machine regularly for any loose or damaged components. Inspect the first cable from the clutch for any twists or wear down. Replace when required. (RCM-10-ETU-VAI) Inspect the cable and it’s cover for any damages. Replace when required. (TS-2010) For safe and proper working, always keep the machine and ventilation slots clean.

  • Page 10: Attachments

    5. ATTACHMENTS SAFETY REGULATIONS FOR ELECTRICAL EQUIPMENTS IN LOW-VOLTAGE POWER INSTALLATIONS 1. General endangerings 5. Electric connection These safety regulations are valid in connection with the The connection is to be realized only by operating and maintenance instructions of the product qualified skilled persons and in released and they are to be observed strictly.
  • Page 12 Renssi Finland Oy Lautamiehenkatu 1 20780 Kaarina FINLAND info@renssi.com www.renssi.com MADE IN FINLAND...

Table of Contents